Showing posts with label saw. Show all posts
Showing posts with label saw. Show all posts

Tuesday, January 9, 2024

Review: Rose Kuli hammer multitool

Multitools have a special place in the heart of all preppers. They make for a resource rich bundle that can provide a lot pf utility in a small package. whilst the ubiquitous Swiss Army Knife is probably the first multi-tool for many ( it certainly was for me), the Leatherman or Gerber belt tool has taken the place in the eyes and EDC of many and whilst these paragons of utility assuredly have their place, they don't do everything. That's were something like  the Rose Kuli hammer tool comes in. 

Prominently featuring a split hatchet head and a hammer head, the jaws opening up to expose pliers and cutters, with a spring assist for the plier arm. The Rose Kuli tool features red wood scaled handles, screws recessed in at the high end and riveted at the bottom end, the plyer-arm retaining loop seats into a notch in the bottom of the plyer arm, preventing the plyer head from opening up unexpectedly. 

The hammer-head sits directly in line behind the hatchet head to maximize impact efficiency for both tools. I found that the small hatchet head being only 4cm (1 1/4") broad but was plenty enough tool to carve a notch in some logs i have seasoning at the back door. You wont be felling any mast logs with it, but it'll work nicely delimbing small logs, and even baton splitting, the hammer head providing a good strike face. I worried that the hatchet head appeared riveted in place and would come loose but it turns out that top rivet only holds the sides in place and the hammer/hatchet pieces were secured by the pivot rivet and marry up tightly when the plyer arm is closed. 

The plyer jaws have both a fine toothed and a broad toothed section, for both fine and coarse tasks as well as a 1cm (2/5") cutting jaw, for wire or nail cuttings. 

The hammer itself drives nails quite well, for such a light tool at 400g (14oz), and I could tap one into my new treated-pine fence-posts with ease. The wood scales and plyer arm make for a comfortable grip on the palm and fingers. the hammer-side handle-face holds a surprise in the form of a selection of folded tools.There are 5 fold-out "blades" to further supplement the tools over-all utility.  From left to right there is a simple leaf-point single edge blade, a Phillips head screw-driver, a wood-saw with fish-hook disgorger tip, a 4-size hex nut wrench (5,6,7,10mm) with bottle-opener and pry head, and a serrated blade  with a file and flat-head driver tip. I would have liked a can-opener, and none of the tools lock, but each are functional.

As Corb Lund would sing "Well it's a vise grips for pliers, and pliers for a wrench
A wrench for a hammer, hammers everything else
"

It came in a flimsy nylon sheath with a hook and loop flap that barely covers the heads, leaving the edge of the hatchet somewhat exposed. 


For a light-weight tool, it certainly bridges the gap between belt-multitool and camp-hatchet.




 

Tuesday, February 20, 2018

Review: sKey


It's no secret that I am a big fan of keychain tools. I've covered dozens over the years, and there are a number secreted away within my EDC, much to the chagrin of airport security and delight of random "I broke my widget" people of the workplace and dinner party alike.
I keep an eye on the Kickstarter "tools" posts and cool-tool sites alike. The SKey is neat little tool that is jam packed with features. This is the new and improved version, in titanium. Yay Titanium. From top to bottom: a Key ring hole.
A very fine hole, just wide enough to feed a split-ring through. Wrench holes. I got the Metric system version which was 4mm, 8mm and 10mm sized holes, the Imperial system version has 14/4" and 5/16" openings. Bottle Opener. what pocket tool would be complete with out the generally supplanted bottle-cap opener. I usually drink screw-caped drinks, but its always good to be the hero and pop a budddies beer-bottle when they've a need. Saw-blade. A set of 13 straight-cut teeth with no fleam this make for a limited rip-saw action, but it'll do in a pinch where you need to saw rather than cut or chop.

Two-head screw bit: secured in the center of the tool in a gap cut into through the center is 1/4" tool bit, with a flat head driver at one end and a chunky Phillips head at the other. The supplied bit is 32mm long, so swapping it out with your own bits of comparable length should be possible. New silicone band: From heir last campaign's version feedback, they learned that it was very hard to keep the bit in place by manufacturing precision alone. The bit is either too tight or too loose. So they developed the new silicone band to keep the bit secure, the band doesn't get in the way while opening bottle or other functions.

Its easy to slip off to make full use of the saw as needed and the bit pops right out. Screw driver hole: Paired with our two-head screw bit, Skey can be used as screw driver with this 1/4" socket. The bit has a ball-bearing detente to keep it in positive fitting and the sKey body adds quite a bit of torque. Box opener: They "pointy end" of the sKey can be used as box opener and works like a charm. The broad chisel end not only acts as a scraper, and a flathead screw-driver, as well as turning the entire tool into a functional, if small, pry-bar. Wire peeler: in the middle of the Skey box-opener end is a notch designed to work as a wire stripper is quite handy for simple electrical device repairing. The deep, sharp sided notch is perfect for stripping quite fine wires.

It's a handy tool and is cutting edge free, keeping it out of the grabby hands of most Eagle-eyed airport security guards.









https://www.kickstarter.com/projects/35126180/skey-key-shaped-titanium-multi-tool-now-in-black

Wednesday, January 31, 2018

Review: "Rambo" mini machette


One of the self-appointed stoke rehab tasks I set myself was to clear some of the backyard jungle, to make way for an over-arching clean-up we badly needed. Normally for brush-clearing I would turn to my Ontario Blackwind, or perhaps one of my other-mid-ranged sized blades, or even turn to my petrol powered brush-clearer, but I wanted to get some physical exercise and didn't want to be swinging long-blades round where there were metal-posts and the like in there field of fire.

As it happened, I had had this particular blade sitting on the shelf, never used. The backyard jungle is clogged with morning glory vine. It's a fast growing and tenacious vine and needs a fair mount of chopping to get through it. I thought this would really do the trick. Weighing in at 1.25kg (2.75 lbs) with an overall length of 37 cm (14.5"). The blade makes up a hefty 20cm (8") of that.

See the rest of the article here on Breach Bang & Clear!


Wednesday, December 20, 2017

Review: Light'n'Go bonfire log

Its log, its log, its heavy hard, it's wood, not new from Blamo.

Here's an interesting product from Light'n'go
that I saw whilst visiting my local Bunnings for  gardening supplies and tools. Bear with me. This is  a weird one. What I saw was a round of a log, 1/4Cu foot / 7.1L /  430 cu cm in size, with  length of sisal rope bolted on as a carry handle. It has a series of radial cuts in the log through its center and along is flat end surfaces in order to make combustible surfaces.

The Bonfire Log is new, unique, and the "most extraordinary innovation in firewood of our time". Put it virtually anywhere and create a beautiful bonfire with one match. No chemicals, just pure kiln dried beautiful white birch, with a paperboard firestarter, with its patent pending design, delivers a great fire and an instant good time. Bonfire Logs can be enjoyed in a fire pit, chimnea, or fireplace, indoors or out. Light'n'Go suggest you can take them camping, cook marshmallows or hotdogs on a stick, or drop a frying pan on the log for eggs.
 It's year round instant entertainment, never easier or cooler.

The cuts are crude chainsaw plunges and could be easily replicated by any skilled operator and the concept of the Swedish or Finnish fire log   is widely known. Take a log, and use a saw to cut at least 3/4 of the way down the length of the log. Adding kindling to these cuts allows a fire to be lit inside the log, which both allows the fire to burn surrounded by fuel but also shelters the fire and insulates it. the cuts allow air into the fire from it base as well as the sides, ensuring  good steady burn. The raised base allows the fire to be lit on wet, or snowy ground, and if both ends are properly flat, the top can be used as a cooktop, where a grill could be placed, or a pan placed.

This could even be enhanced with  the addition of a purpose  built grill-top such as the Sportes MITI grill.

Back to the Light'n'Go log: It is reported to be suited to both indoor and outdoor fireplaces. apparently it can be successfully lit with just 1 match and then would burn for more than 1.5 hours while the bonfire jumbo log burns for about 2.5 hours.

Lacking accelerants, the all-natural, fire-log, being kiln dried birch, lights with one match, burns 2.5 hours produces a large halo, a clean flame, and a charming aroma.

The Light'n'Go log is  a commercial product you can pick up at a hardware store, but you could make your own easily enough if you have dried seasoned logs and you're a deft hand with a chainsaw. However, if the plunges or cross cuts seem a little too much, a similar effect could be achieved by simply splitting the log with an axe four ways, and binding it with a length of wire to hold it together in much the same way as the Sportes MITI grill.

 I have a couple of logs in my fire woodpile that are flat ended and will see about cross-cutting one with a hand saw to give this a try myself but as an eyes-on, it looks like the Light'n'Go bonfire log is a very simple, easy to use and effective looking product. but its nothing you couldn't do yourself, given skills and simple materials. ust like baking bread or sewing pants. Before you scoff at its simplicity and redundancy, consider the utility and convenience. Time not spent setting up a good fire is time spent securing your site, food prep, setting camp and doing vital gear and personal maintenance. 

Friday, September 11, 2015

Review: VSSL Outdoor Utility cache


First seen on Breach Bang & Clear

I had missed the release of this particular product when it ran through its Kickstarter campaign, mostly for financial reasons, but my dear friend and Kickstarter aficionado Gareth Hodges had one and wanted to pass it on, so I snapped it up at a generous discount (thanks man!), so I have had one in my hot little hands, and pack for a while now.


This is the "utility" model of the VSSL which is to say, one of five models they offer, and this one is filled with s variety of useful and needful survival items.
The main body of the canister is a machined aluminium tube, with end caps that screw in to give a gasketed airtight seal. Each VSSL unit is 23cm (9") long by 5cm (2") diameter made from seamless extruded mil-spec anodized aluminium, and this model weighs 510g (18 oz). 

The unit is very sturdy, the two end caps are knurled, and the body has engraved details on it, as well as some knurling as well, giving a solid grip to open either end.


The real utility of the unit however is in its contents. As well as the two end caps, one of which has a dual mode (static high/low and SOS) LED ‘flood’ beam lantern light, illuminates a large area ( which runs on 3x N type or Energizer E90 batteries), and the tail cap holds a 4 hour burning pure Canadian beeswax candle and has an oil filled compass on its surface.

The seven little aluminium pill-boxes each with a small collection of survival needfulls, some in pairs, others singly. 


The contents are thus:




  • Razor blade
  • 6 Aquatabs® water purification tablets
  • Wire saw (high tensile, 60lb working strength with handle straps)
  • Aluminium beadless emergency whistle
  • Waterproof matches
  • Tinder Quik® fire starters
  • Fishing Gear
  • Signalling Mirror
  • Marine grade rope (250lb breaking strength)
  • Reflective trail markers
  • P38 military GI Type can opener
  • First aid supplies 
  • VSSL priorities of survival and instructions

    There's a good spread of items, and here they are itemized:The pill-boxes aren't hermetically sealed, but they don't really need to be, as they all live in the VSSL tube. The contents aren't meant to be for long term sustainment, rather to help out in the event of a short term emergency, or even to fill a gap in your EDC when out adventuring. It's solid construction and precision machining makes it a very well put together survival cache. 

    The weight is a bit of a concern considering the overall size and scope of the contents, however, they are well packaged, so would be safe and ready to use when you need it, whether it's been sitting in your pack, in the back of your car or buried in your safe-drop spot. 

    VSSL also produce several other versions of the flask: a Fist-Aid canister (full of boo-boo repair items), a Shelter canister (with a tarp, line and the like), an empty canister (build your own), a Flask (300mL of capacity and two collapsing shot cups) and their Zombie Spike version (for brain stabby goodness). 

    Thursday, December 18, 2014

    Home Front: summer garden 2014

    As with previous years, I planted a vegetable garden over the winter-spring cusp, in order to have a good summer crop of greens.

    Using wood I reclaimed from pallets that had been left on the road-side by a neighbor who was having some renovations done, I built this box in an afternoon, dug post holes, dropped it in place and left it lay-fallow with weed-suppressing cardboard boxes lining the base. I then filled the box 3/4 the way up with a mulch/soil mix that I had purchased (and got a water-saving rebate for), and hit our local garden/hardware store for seedlings.

    In previous years I have planted in our low-sided veggie patches, but this year, as a result of my lovely partner Omega's request for a raised bed, to give better access to our crops without the need for bending and kneeling, which is one reason I built a hip-high box.

    These little guys are the other reason. We now have four Flemish Giant rabbits. They started off palm sized, and will eventually get to be 10 kg (22 lb) each. I have now made two wired-off enclosures for them to run in, but we found they could both climb, and hop into the raised bed. Hence the "over the top" chicken wire over the bed, and the over-hanging lip to make a more effective perimeter fence.

    A lucky finding was that the rabbits didn't like the artichoke plant that we had regrow this year from last years failed attempt. We've managed several meals worth of artichokes and Tactical Baby enjoys selecting which "dinosaur flowers" we are going to have. There are also several onion plants in there, also segregated from the bunnies, and it looks like we might have some invincible potato plants coming up as well.

    I lined the side of the raised bed with a strip of copper tape, which has proven to be an effective slug and snail deterrent. We did have a cabbage moth caterpillar problem, which was attacking the broccoli, cauliflower and cabbage plants we planted, but the invading bunnies ate all the buds from them anyway, so we lost those crops.

    What we do have going however is two kinds of kale, spinach,  Vietnamese mint and coriander, tomato and spring onions. We also have several eggplants on the go in there.

    Its a very high density plot, and it takes some rummaging to get from one plant to another, but being hip-high has been a great improvement.

    My other partner Lorin has been admonishing me for planting the tomatoes in there, and not separately, because of how big they've gotten, but I'm a sucker for high density, bountiful and bodacious harvests, and that covers my gardening too!

    We might even give the vertical garden another go, although we've left it a bit late in the season. Between the two extra rain barrels we put in, and the unfortunate reduction in our number of chookens (lost 7 overnight, some kind of illness, down to one, the unkillable Princess Layer, veteran of four previous calamities) we might even make more use of the back yard this summer. 















    Wednesday, September 17, 2014

    Home Front: log, it's log!



    A couple of weeks ago I came home to this rather large pile of timber in my front yard. Apparently the local arborists know that I have a wood fire and after propositioning them to take the least tree they cut down, they've taken it on themselves to not have to mulch any logs they fell, and after asking my eldest who was getting home from school, they tossed a tree into my front yard.
    At least this time I didn't have a veggie patch for them to crush.

    Welcome Mt Birchmore, altitude 1.2m.
    I'm pretty sure it was birch, although there was no foliage for me to confirm with.
    One thing I know, there was a whole tree's worth.

    Obviously this would need to be seasoned before burning it, but as we've just come into spring here, and summer brings "total fire bans" for weeks at a time, I will be able to comfortably sit through the six months of drying time that is recommended for green wood. Given Melbourne's zany weather, probably just for the best, anyway.

    I was lucky that the arborist crew chainsawed most of the logs into pretty uniform lengths, and even the larger blocks of wood into manageable chunks.
    I spent a number of hours hauling all this around to the back of our house and stacking it up.
    Before stacking my new haul, however, I needed to clear out my vine, leaf litter and as it turns out, bush rat nest filled old log pile.
    This pile of mixed logs, including redgum and a variety of other woods that I have salvaged from around my neighbourhood and on my drives to and from Triceratops Girl on the weekends. It's become part of out urban-scavenging mindset to always be on the lookout for logs piled up out the front of houses. When we can, we stop and load up the back of the RAV4 and restock our supply.
    After cleaning out my log store spot, a paved area beside the trampoline and fenced off chicken run in what used to be a bare patch of grass, I stacked up my timber booty in three layers, on one side, and a single stack behind the wall my smoker sits on, with a good mix of large logs and thinner ones so that I have a selection when it comes time to burn it. I covered the main body of the stack to attempt to keep the spring rains from setting it to rot. Triceratops Girl was even keen to get involved with the hauling and stacking she has a slow-combustion stove at her mothers place, so knows all about having nice wood fires.

    Wood fires may not be the most ecologically friendly, often producing a lot of particulate waste, especially in open fires, or when using green wood, but when it comes to survival and self-reliance, having a supply of firewood, and the means to both cook and heat with it can make the difference between comfort and squalor. In snow-bound areas, it can mean the difference to life itself.

    Wednesday, April 9, 2014

    Home Front: Bug Out Jar

    I've been looking at putting together Bug Out Kits, to offer online, and possibly put up on Kickstarter, to get out to a wider market.

    I've been thinking about what to include in such a kit, and what to put it in. My thought was to have something that could rattle around in the boot of a car, in the corner of a ruck or by the front door at home. It needed to be small and unobtrusive, rugged, easily identified but not standing out as a prize.

    I happened to have a stash of bio-bottle containers, not unlike the Patho-Pack containers (or as we call them at home, "Dead People Jars"). The Bio-Bottles are biohazard rated, air and water tight shipping containers, 850 ml capacity, with a "size in carton" of 12cm x 12cm x 17cm, which meets UN3373 regulations, meeting 95kPa pressure testing. Good solid containers!

    The contents of the kit I have been pondering, based in part on my own EDC and adventuring kits in past, and my experiences camping, LARPing and travel around the world. I have also been working on a tight budget, so have kept the items pretty generic where possible.

    I've included in this beta version:
    A wire saw
    A space blanket
    A fire starter (which includes a button compass)
    A 100' length of paracord
    A knife (which includes a rescue hook/strap cutter)
    A steel paracord shackle
    A WTF multitool
    A multifunction spork
    A 850mL Bio-Bottle

    I may include some other contents as options, including a couple other excellent items, as well as carry-pouches, and even upgraded, expanded kits.
    Hopefully, there will be some interest in these, and I'd love your feedback as to contents, carry and packing thoughts and I can make this happen.

    [EDIT] Check out the jars, now in my online store, for sale!

    Wednesday, March 5, 2014

    Review: ITS - Urban SERE kit

    I like to increase my skillsets as often as possible, as well as staying on top of my sleek EDC needs so I am always on the lookout for new kit that I can both have on hand, but also try out new techniques and learn new things. The Urban Kit from ITS Tactical is a perfect example of this.

    Held in a sliding plastic case 8cm x4cm x1.5cm, it contains a number of very cool SERE elements in a very compact package. The tools include:
    • A folding razor / saw, with inch and mm rulers provides a safety knife and a sturdy saw.
    • A diamond encrusted wire saw/file, great for cutting through chains, filing rough edges
    • Handcuff Shim, the flexible, rounded key for opening cuffs (in the case of unlawful restraint)
    • Quick Stick, the stiff pointed metal key for popping many padlocks open by bypassing the pins, and reaching lock shackle itself.
    • two coin/button sided, polymer Universal Handcuff Keys, (again, for escape from unlawful restraint, with double-locking pin)
    • A ceramic razor blade, because having a small, non-magnetic blade in your SERE kit can have all kinds of uses, and remember, if they can't find it, they can't take it ...
    • 1.8m (6') of 85kg (188 lbs) test yellow Kevlar cordage, for both friction sawing, but also a variety of other purposes, you can only boggle at.
    • 1.8m (6') Stainless-Steel Coated Leader Wire which gives you an even stronger line than the Kevlar cord, but its specific properties can also lend itself to a whole other raft of uses. 
    • Lastly the very cute, Grade AA button compass, what's not to like with having a compass in your EDC? Nothing at all. 
    All in all, this is a great little kit. It fits in my pocket with ease, leaving very little indication it is there, and does just as well in my pack. This is a very compact way to not only collect, but also carry some really good tools for many of your urban SERE needs.

    Thursday, October 10, 2013

    Review: ThinkGeek - Pocket Chainsaw


    For my last birthday, I did my family a favor and purchased a bunch of my own presents. I'm notorious for having already picked items off my own wish-lust-lists.

    Think Geek has been a good source for gadgets and gizmos to feed my need, and this year was no exception. The difficulty being getting items that can be shipped to Australia, as they have started restricting items based on, well, "pointiness" as far as I can tell. The UC M48 Ranger Hawk,KA-BAR Zombie Killer knives and even the Dead-On Annihilator Superhammer available through Think Geek are not for export to Australia. Sad-making!

    However, one of the pieces of kit that IS still available, is this, thePocket Chainsaw.

    I have covered my Wire Saw's previously, which are a gorgeous bit of kit to have stowed away in a Bug-Out-Bag or camping set, but there are times when you really need a bit more bite.

    I've never been very comfortable with powered saws, (even when Picatinny-rail mounted...) because of the risk of kickback as seen in Dawn of the Dead and described to me by a variety of experienced wood-cutters (not all of whom had all their fingers). I can and have used chainsaws, I just prefer non-powered tools to do the job. Slower, I know, but unless I needed to do a lot, and often enough to become familiar and proficient again, I'll stick to hand-tools.

    This pocket chainsaw fir my need perfectly! Made of high strength, heat-treated steel which has been coated for rust resistance and smoothness of cutting action, it comes with bent rings to hook through the lead ends of the chain, and corded plastic handles to ease the cutting action, and increase the draw and reach of the saw.

    The 70cm (28") saw features 124 bidirectional teeth, capable of cutting in both the forwards and backwards draw, and the beauty of this piece is that when you are done wit hit, it rolls up into a coil that fits int its own carry-can, along with the welded loop-hooks, and the whole package weighs only 140g (5 oz)

    It comes with two molded plastic handles with cord loops,  which I fixed to the loop-hooks with a larks-head hitch. The loops and handles added about another 50cm or so of reach, as well as keeping my knuckles clear of both saw and log.

    We had some pretty damaging spring wind-storms here, and my partner Anastasia had a largish gum-tree branch fall on her shed, which seemed a perfect chance for me to finally get to use some of my newer acquisitions.

    I chopped the smaller limbs with my
    Ranger Hawk, as will as its big brother, the M48 Walking Axe which packed considerable wallop for such a small cutting head. Both bit faster and deeper than my usual go-to Fiskars Log Splitter. However, when it came to cutting through logs, after I had trimmed the branches off, it was time for the saw to do its thing.

    Pocket Chainsaw
    click the picture to go to ThinkGeek store!
    I didn't stop to measure the diameter of these limbs, but they were at least 20cm. Bigger than my skinny little thighs, for sure.


    The saw bit in fast and made quick work of the first third of the log, but I found that a comfortable, narrow shoulder grip tended to cause the chain to bind up, leading to me needing to take a very wide stance to effect my cuts.

    Once I cleared the hard core of the branch, I was a matter of raising the ends, so that gravity would force the log open, to reduce that binding. This was because I was cutting "up" standing over the log. Pulling "down" and cutting a suspended branch would have been much easier, but dangerous.

    When I was done, the loop-hooks simply disengaged, I unhitched the handles and stowed the coiled saw and loop-hooks in the pocket tin. The handles had to be stowed separately. This was an excellent, easy to use and practical addition to my car-kit, ready to pull out and cut up road blocking obstacles without the need for fuel, and storage space.
     

    Here's just a quick picture of the M48 Walking axe, hanging off the largest of the limbs I cut with it, in-situ. The para-cord wrap on my M48 Ranger Hawk completely unraveled whilst chopping, which was very unsatisfactory. I will eventually re-tie it myself.

    The folding pocket chainsaw worked tremendously well, silently, and quickly. 

    Wednesday, September 25, 2013

    Review: Spyderco Byrd - Harp tool

    A very touching gift was given to me recently, for an anniversary, and because my tastes are well known, it was something i wanted to blog about!

    This is the Spyderco-Byrd "Harp Tool" so named because of its resemblance to the musical instrument in its layout.

    The tool consists of a C shaped bar of steel, filled with eight separate tools, held in place by a pin under tension from the ring itself. The tools in the array are  held in place by having a ridge and slot on alternate faces, such that the tension "snaps" them in place.


    Available tools are: a flat-head and Phillips-head screwdriver, a  punch/awl, a gimlet (I had to look that one up, but it is a small hand drill) , a wood-saw, corkscrew (always a favorite and plain essential if operating in the European AO), a light-use file and a small/"large"-head hammer that doubles as a bottle cap opener.

    Lacking a knife, this is definitely a secondary tool-kit addition, but you can never have too many tools stashed away. The tools are all functional enough to get little jobs done, but are obviously not up to a lot of hard labour, especially given the ridge-and-slot locking design. I'm not sure what I would use the hammer for that I wouldn't just use a rock for, but For Want of  a Nail...


    With an overall length of 16.5 cm (6.5") and a closed length of 9.5cm (3.75") and weighing only 117g (4..6oz.) this is a light weight addition to a pack, picnic basket or glove box. That's where I will be stashing this little guy, perfect for a three hour tour.





    Thursday, June 13, 2013

    Review: Get Home Bag - Bug Out Bag

    Some friends of mine asked me recently for recommendations for Bug-Out-Bags, after watching the NatGeo "Doomsday Preppers" show, and The Colony.

    I don't have a "Bug-Out-Bag", per se,  but I do have two "Get Home Bags". One in my car, and one is my every-day pack. 


    I've covered both before, as Items, and shown off what I keep in them from time to time, but as a unit, I thought it might be worthwhile laying it all out.

    My primary, EDC and "get home bag" is the Platatac Bullock Echo, to which I've added a couple of extra pouches and loaded up a fair bit. This is the bag I have with me everywhere I go, and I still manage to carry my iPad, days food and whatever else I need day by day in it. Great pack. It's a reasonable load that I carry, as you'll see, but I can run, climb, crawl, jump and probably swim with this all on me. I get some funny looks sometimes, but I'm used to that. 



    1) waterproof poncho, OD / first aid kit
    2) set of metric Alan keys on a split ring
    7) cord
    12) ZuluNulonGear CAOS admin pouch with small adjustable wrench, LED plyer multitool, Buck Tools Multitool, dexim BluePack 1200mAh ( 5V-500mAh) USB iPhone battery, UV laser pointer, kumquat carbon fiber credit card bottle opener, sharpie.
    14) microfiber towel
    16) Platatac Half Med pack with elastic bandage, forceps, non-latex gloves, cylume sticks, band-aids, bandages
    18) Sea To Summit Alpha cutlery and chopsticks
    20) Platatac HeadOver head sock 
    23) alcohol based hand sanitizer
    26) cable ties
    27) toiletries bag with toothpaste, soap, safety razor, floss
    28) essential oil deodorant bag
    29) Spare glasses in hard case
    30) nut and honey snacks
    32) whistle

    I also keep this, in the car. I consider this my "broken down in the side of the road" kit, but also doubles as my camping/kicking adventure bag. I have a full first aid bag in the car, and a fairly complete tool bag as well.

    As I've covered before,  the Kathmandu Hip Bag is a very dependable, and feature rich, wearable pack.

    With my FUBAR and CRKT Stiff Kiss it is quite the formidable survival pack.

    Here's what I keep in it....

    33) heavy waterproof poncho, Woodland camo
    34) gaffer tape
    35) camping propane gas
    37) enamel mug
    38) bug spray
    39) sweetened condensed milk in a tube
    42) high-test marlin-fishing line
    43) Petzl "figure 8" device
    44) Kong locking carabiners
    45) 5mm dynamic rope

    46) matches
    47) fishing hooks and sinkers in-a-tin
    49) hand carved snare with braided line
    50) Miltons water purifier tablets
    51) nails
    53) bandages
    54) tea bags
    55) whistle and flint
    56) powdered chocolate.



    I can wear both the Bullock Echo and the Kathmandu bum-bag at the same time, between the two I have a lot of survival kit in fairly small, wearable packages. Given that I don't spend a lot of time in the distant wilderness, but more urban sprawl, and country roadsides I think that in the event of a disaster in my region, I would be able to manage with this loadout for quite enough time to get home, or away, and overcome most any obstacle that I might come across.

    For me the idea of a "bug-out-bag" is more of a "never coming back" bag, which would be a little more substantial, and aggressive, where these two are more a "get out of trouble" set. I can help myself, and others push through rough times with what I carry at all times, and have with me in my car...

    After the Black Saturday fires of 2009 and the semi-regular flooding we are getting, I want to be ready, Equipped!




    [edit] I've been asked if i would make Bug-Out-Bags for sale ... anyone interested?

    Monday, June 18, 2012

    Review: Zazz - Survive Army Fire Steel tool


    The good people at Zazz were kind enough to send me one of these little guys this week. I have quite the collection of fire-steel's now, between my Swedish FireSteel (which was a gift a number of years ago, and has a prize position in my EDC) and the fire steels found in both my Gerber Bear- Grylls Basic and also in the Gerber Bear Grylls Ulitimate survival kits.  I really like these pieces of kit. They work in the rain, in the snow and last for thousands of strikes.


    This one has some additional features which are worth mentioning. Firstly, a goodly sized ferrocerium rod (all the better for striking with) and a saw-toothed striking steel. The back side of the striking steel is marked with millimeters to act as a small ruler. The body of the striker, as well as being dished to better fit the thumb, is also equipped with a signalling whistle. Lastly, the body of the ferrocerium rod is also equipped with a button compass.
    Here are some shots of me testing out the striker, a very impressive rain of hot sparks, certainly enough to light a camp-stove at the first strike, and can get tinder going in no time at all, in good conditions.

    Including a compass is a terrific idea, even if it is not up to military grade navigation, it is far better to have -any- compass rather than none at all. Rod and striker are affixed with a nylon cord and a stopper. The cord appears to be sufficient to reduce the effect of the steel on the compass, for rough navigation, at least.

    I'll leave you with the packaging, which is quite entertaining in and of its own right.

    I'm certainly going to include this is one of my packs, because frankly, not being without a source of fire is something I strongly encourage. Now to decide which one to put it in!
    Related Posts Plugin for WordPress, Blogger...