Showing posts with label prybar. Show all posts
Showing posts with label prybar. Show all posts

Tuesday, February 7, 2023

Review: Stilletto titanium nail puller

I do love a  good salvage. Whether it be road-side junk-swap, flea market bargain or dump-harvest the idea of junk salvage strikes a deep chord in me from both a 

post-apocalypse survivor point of view  and 80's kids sci-fi. That said, sometimes having the right tool for the job, especially if you're working with aged or non standard materials. I do like to recycle timber, for garden-beds and storage shelf construction, and getting the nails out can sometimes be a real pain, especially in well seasoned hardwood pallets.  

Previously I have made do with my pair of  demolition hammers (the Dead-On Annihilator and the Stanley Fat-MAX FUBAR) which are brute force tools, even when paired with pry tools such as Jimmy and the ever rugged Breacher bar. I've had a lot of success with this combination of tools but they're inelegant. I'm also a sucker for titanium. I know its not a miracle metal, neither mithril nor vibranium/ adamantium but its pretty rad.

Now on to the tool!

This is the original Stiletto Titanium framing nail puller with the Patented nail removal feature! In essence it is a 30.48cm ( 11.5") pry bar, made of one piece of titanium. It has an open-truss design to cut weight but retain rigidity, weighing in at 300g (8.5 Oz)









One end features a standard cloven hoof pry edge, which is quite pointy, for aggressive purchase finding, and the other end its a cat's paw, 90 degree pry bar, with a similarly pointy tined  cloven end, and a smooth, rounded fulcrum for mark-free nail-pulling. The key feature of the cats-paw end is the perpendicular dimpler. This open-ended conical protrusion is used to punch a circular indentation into the wood,below the level of the head of the nail, in order to allow either of the pry ends to find purchase and pull them out. This is achieved by centering the open end of the dimpler around the had of the nail and striking the back face with a hammer, hard enough to drive a dimple into the wood around the nail-head. 

The dimpler has an internal diameter of 1cm (0.4") which should be plenty big enough for common nails found in timber. Stiletto specifically state it be used for "common nails" only

 

The divot allows the tines of the nail pullers to be worked under the nail-head without gouging the wood too much ( divot aside). I found that for especially stubborn or embedded nails ( or punched down, or otherwise deep) that the tines can be driven in by hammering in the tool from the other end. It should be worth noting that Stilleto claim the titanium strike faces outlast steel bars 3X longer - doesn't spall, crack & mushroom like steel bars. I also use the back face of the cats-paw to drive some nails, and though it took some transfer marks, the satin matte finish was un-marred. It's a bit light to act as a hammer effectively but in a pinch, just fine. 


The open truss body is clean edged and smooth to the hand, allowing a strong grip be taken without roughing up your hand.
The shaft of the tool is slim enough to be threaded through PALS/MOLLE channels, for belt, pack or carrier  carry, but I wnt through my leather scraps bag and whipped up a quick holster with a belt loop for my use. I look forward to easy break-down of pallets and furniture for firewood or lumber needs.

Its a great tool, multi-functional, rugged and fit for purpose. 















Tuesday, February 20, 2018

Review: sKey


It's no secret that I am a big fan of keychain tools. I've covered dozens over the years, and there are a number secreted away within my EDC, much to the chagrin of airport security and delight of random "I broke my widget" people of the workplace and dinner party alike.
I keep an eye on the Kickstarter "tools" posts and cool-tool sites alike. The SKey is neat little tool that is jam packed with features. This is the new and improved version, in titanium. Yay Titanium. From top to bottom: a Key ring hole.
A very fine hole, just wide enough to feed a split-ring through. Wrench holes. I got the Metric system version which was 4mm, 8mm and 10mm sized holes, the Imperial system version has 14/4" and 5/16" openings. Bottle Opener. what pocket tool would be complete with out the generally supplanted bottle-cap opener. I usually drink screw-caped drinks, but its always good to be the hero and pop a budddies beer-bottle when they've a need. Saw-blade. A set of 13 straight-cut teeth with no fleam this make for a limited rip-saw action, but it'll do in a pinch where you need to saw rather than cut or chop.

Two-head screw bit: secured in the center of the tool in a gap cut into through the center is 1/4" tool bit, with a flat head driver at one end and a chunky Phillips head at the other. The supplied bit is 32mm long, so swapping it out with your own bits of comparable length should be possible. New silicone band: From heir last campaign's version feedback, they learned that it was very hard to keep the bit in place by manufacturing precision alone. The bit is either too tight or too loose. So they developed the new silicone band to keep the bit secure, the band doesn't get in the way while opening bottle or other functions.

Its easy to slip off to make full use of the saw as needed and the bit pops right out. Screw driver hole: Paired with our two-head screw bit, Skey can be used as screw driver with this 1/4" socket. The bit has a ball-bearing detente to keep it in positive fitting and the sKey body adds quite a bit of torque. Box opener: They "pointy end" of the sKey can be used as box opener and works like a charm. The broad chisel end not only acts as a scraper, and a flathead screw-driver, as well as turning the entire tool into a functional, if small, pry-bar. Wire peeler: in the middle of the Skey box-opener end is a notch designed to work as a wire stripper is quite handy for simple electrical device repairing. The deep, sharp sided notch is perfect for stripping quite fine wires.

It's a handy tool and is cutting edge free, keeping it out of the grabby hands of most Eagle-eyed airport security guards.









https://www.kickstarter.com/projects/35126180/skey-key-shaped-titanium-multi-tool-now-in-black

Wednesday, February 7, 2018

Review: Jimmy and Chappie




Sometimes, you really just need the right tool for the job, especially if that job involves bashing things or breaking things. Sometimes it's a pesky padlock you lost the combination for and can't manage to shim open. Sometimes it s a pallet of wood you're recycling and need to cut the rusted nails out of. There are lots of different reasons having a set of bolt-cutters or a small crow-bar for. I'll leave the glorious details up to your imagination. Importantly, sometimes these jobs are called for away from your workshop or bunker. Which is when smaller, portable versions are called for. that's when tools like my "Jimmy" and "Chappy" come into play. I have a full-sized set of bolt-cutters (seen sheathed in my SORD 870 Back Scabbard here) and a collection of pry bars big and small all the way up to a whopping huge 1650mm Cyclone fencing post Eagle bar.

So the addition of a short, 18" Plumb wrecking bar which I've nicknamed "Jimmy" after one of the traditional names for a crow-bar, to go along with the seriously beat up and battle-worn "Chappie" bolt cutter. Both tools I rescued from a nana-garage sale a while back. Why "Chappie" you may ask? Because "Chappie can no do crimes".

 Jimmy is a 18" Wrecking Bar made by Plum, and features a goose-neck at one end and an angled chisel end at the other end. This allows you to pull, pry and straighten, with the angled chisel end good for prying and lifting, the goose-neck end is slotted for pulling nails. The length of the bar is hexagonal in cross-section, making it possible to attach a shifter or a wrench to it to for extra torque, should you really need to pop something open. Constructed from forged high carbon steel, Jimmy and bars like Jimmy can and have taken a beating. Hammered between planks of a pallet ,and stomped on to pop a plank up, even used as an impromptu hammer utilizing the flat face of one of those hexed-sides to drive home tacks or loose nails. I've found the 18" Jimmy offers more than adequate leverage for the tasks I've put it to.



Jimmy has a very hefty weight to it, thanks to its forged carbon-steel construction, which is a boon, but not too much of a burden to carry around in a pack or in the back of a vehicle. I've experimented with carriage options on both my battle-belt and LBE vests too, but am not yet satisfied with both secure, quiet and accessible options. Ideally I'd like to be able to reach back and whip it out to pry a door or pop a zombie in the head, one handed, but if it's in bag or on my back, I'd have to get a buddy to help me out. Not getting hung up on things is also important, especially in a search and rescue or salvage situation and I will end up with a "Medium speed, acceptable drag" option in the end.

Chappie has had a much harder life and bears the scars of years of neglect and abuse. His cutting hammers are dinged and chipped from ill-use, there is rust and crud worked into his recesses and workings. The rubber of his handles is cracked and broken of in many spots, bare metal showing through, and there is a post-fulcrum adjustable nut and post that act to limit over-bite on the cutting hammers. The nut needed a little WD40 and a wrench to loosen but once loose, It was possible to adjust the limiter to allow a better cutting action from Chappie with his compound hinges. The damaged hammers are hardened so are really difficult to repair, resistant to filing as they are. I have been able to do few minor cuts with Chappie, clipping exposed nails in salvaged timber and cutting chain links for home maintenance jobs, but the damage is inconvenient.


Bolt Cutters typically have long handles and short blades, with compound hinges to maximize leverage and cutting force. They can yield upwards of 20 kilonewtons (4,500 lbf) of cutting force for a 250 newtons (56 lbf) force on the handles. Given this, I feel I'm missing out on prime cutting power with the chips and dings in Chappie's teeth. An upgrade to a first-hand cutter may be in order. That said, by adjusting the post-fulcrum nut and having a go at the worst of the deformations to make it workable, but I suspect it would require power tools and re-tempering to get it back to prime condition.

As with Jimmy, Chappie's small size makes it very portable and easily stowed in a pack, back pocket or in a suitable pouch. Being able to quickly and quietly cut chain, cut chain link fences or locks could be very useful in a disaster situation, where search and rescue or salvage might be hampered by bigger, heavier tools.


Again, don't be doing Crimes!

But. Have the right tools available to you you to do what needs to be done. Practice and get to know the limitations and abilities of your tools, and practice caring them to get a good setup in place.

Wednesday, March 16, 2016

Review: MetalDreamer - PINCH multitool

Always on the lookout for new and exciting titanium pocket tools, when the Pinch tool came up on Kickstarter, I could hardly restrain myself. Given the very affordable pledge levels I didn't feel bad about chipping in, and was pleased to see an envelope arrive in the mail not too long after. Created and designed by Jeff Morin the Pinch is the smallest tool in the MetalDreamer lineup it is billed as the go-to tool when you're in a Pinch! Cute.

Packing 11 functions into its 1.5" x .5" design, the Pinch has a surprising amount of home-fixit application in mind in one little package.

With a mini pry bar, bottle cap opener, 6-mm hex wrench, wire stripper, nail puller, keychain eyelet, 1” mini scraper, hex driver bit holder, and two flathead screwdrivers. I ordered mine in metric, so it also features a 3cm ruler etched into the scraper side as well.

I opened a few bottles, pried open some tightly sealed tins, and scraped some stickers with it, and it seems to live up to its intent, but the small size makes it quite difficult to apply much torque, but you'd expect that from a tiny keychain tool like this. If you wanted a big prybar, you'd go the County Comm Breacher Bar, or the like. This is a keychain fixit tool, not a dedicated tool-box replacement.

The Pinch was on Kickstarter, and is still only available to backers it seems, but keep an eye out, and look over the other offerings from Metal Dreamer, they have some very pretty, and functional looking designs.

Friday, February 12, 2016

Review: TrueUtility - FIXR


This is a fun little tool that was sent to me by the folks at True Utility, who stock all number of nifty gadgets and gizmos. I've been keeping it in my pocket along with my pocket EDC for the last few months, finding uses here and there, and I thought I might tell you a little about it here.

It's only a little tool, and only fit for small tasks, but there are times when only a small tool is required and having something that is "just so" is all you need.

This is the20 tools in 1 FIXR by True Utility.

Constructed of a black titanium coated, 422 grade stainless steel with a silver stainless steel disc, rotating on sprung stainless steel ball bearings - The FIXR is a flat, light, strong, and definitely useful tool.

Formed around a wire-gated carabiner, it will clips to a variety of narrow loops, hooks and straps and is always ready for use, with a considerable array of tools crammed within a very small small space. The brass rotating tool plate serves to protect and keep all the tools safe when the FIXR is not in use.

It simply twists with a push of the thumb on its sprung bearings to click definitively into set positions to use the driver bits, nail cleaner, extra sockets, razor sharp cutter and wire stripper.

A full breakdown of the tools is:

1. Wire-gated carabiner
2. Bottle Opener
3. Nail Cleaner
4. Large Flat Screwdriver
5. Medium Flat Screwdriver
6. Small Flat Eyeglass Screwdriver
7. Medium Phillips Screwdriver
8. Small Phillips Screwdriver
9. 14mm Spanner/Wrench
10. 12mm Spanner/Wrench
11. 10mm Spanner/Wrench
12. 8mm Spanner/Wrench
13. 6mm Spanner/Wrench
14. Bicycle Spoke Wrench
15. Cutting Blade
16. Wire Stripper (by combining the blade with the notch of the tool disk)
17. cm Ruler
18. Box Opener
19. Pry Bar
20. File

I would have put the file along one of the thin edges so you could use it as a metal-cutting tool, but it certainly works to round off any rough edges of things you might find bothering you. Wire, glass, ceramic, fingernails or teeth, it's surprisingly bitey.

The FIXR has proven itself worth the space it takes in my pocket, and I've mended a number of things, opened packages, and pried a few stuck items with it. Smaller than a multitool but still packing a fair number of useful items in one little package, if you want a "forget about it till you need it" tool this certainly fits the bill.




Friday, December 11, 2015

Wish-Lust: Kickstarter- SPARtool

I caught the scent of a new hardcore multi-tool being crowd-sourced on Kickstarter. Contacting the designer, Stewart Yeoh , I got some pictures to share with you, and the text behind the ideas.

I've covered a couple of tools like this in the past; the famous Crovel, the ubiquitous e-tool , and the Bosse Tools shovel. Then there are the Dead-On Superhammer and the Stanley FUBAR.

Stewart put a very thorough description of the SPARtool up on the Kickstarter, so this is going to mostly be a repeat of his words. So, here they are:
  • Dig in both soft and hard ground.
  • Chop through branches and split logs.
  • Saw through wood, plastic, bone, or sheet metal.
  • Hammer tent stakes, nails, or rocks.
  • Open a cold bottle of something refreshing after all that work!
A common gripe with multi-tools is that many of their mechanisms are awkward and difficult to use, and inferior to a dedicated tool for the job.  We strive to create a design that shifts smoothly and safely between functions, and is comfortable for all its uses.
Shovel 
The SPARtool features a 6"x 8" shovel head with integrated chopping edge, saw blade, and bottle opener.  The 1075 carbon steel and Zytel handle is topped with a flat pry bar, hammer, and 4" pick that functions as a handle for digging and sawing.  the total tool length is 22", and the weight is 2 lbs 15 oz. 
Shovels derive much of their strength through smoothly transitioning concave and convex geometry, which distributes stresses evenly and allows them to be thin and light. 
The SPARtool shovel reflects these principles in its shovel head design.  Sturdy tempered carbon steel provides the cutting edge, which is both hard enough to hold an edge, and tough enough to absorb impact. The face is gently curved to increase the angle of repose of loose soil, and gather more in each scoop.  Our shovel provides the foundation for other tools while remaining an efficient digging machine.
Axe
One side of the hardened and tempered steel shovel head is ground scary sharp, giving a generous 9-inch cutting surface.  When used against small branches the thin edge acts like a machete, passing through with minimal resistance. When employed to split logs, the curvature of the shovel head acts more like an ax, forcing the wood apart cleanly. The edge of the shovel is carefully aligned parallel along the center of the handle, creating the most direct transmission of force, and reducing the chance for dangerous glancing blows.  

Saw 
Sometimes a chopper is not the right tool for a job. When you need to make a clean cut, separate bones in game, or neatly trim pipe or tubing a saw is the answer. Saws are often one of the weakest links in multi-tools due to disregard for their mechanical and design principles. Our saw teeth are an aggressive 4/inch, 60° tooth layout, cut at a 15° rake.  Our saw is laid out as a crosscut saw, with a 15° fleam and a wide alternating offset tooth pattern to clear a wide kerf. Once again the saw edge is parallel to the handle to allow pure single axis motion.  

Hammer and Pick
Our 1.5" hammer head provides a large and forgiving striking surface; while its thick plate steel construction makes damaging it a near impossibility. 
The 4 inch pick spike can break hard earth and rocks, forcefully open padlocks, and might save your life if the zombies ever do decide to rise.  The curved pick also serves as a convenient and comfortable handle when digging or sawing. The top end of the SPARtool is inspired by the Halligan bar, a tool used by firefighters and first responders for forcible entry and rescue. We have maintained the layout so that Halligan techniques can be used with the SPARtool.
The SPARtool handle ends in a flat pry bar with a rounded, shepherds-crook curve. Useful not just for prying open doors or crates but also pulling nails, splitting wood, chiseling, and other demolition tasks. The improved bottle opener now fits a variety of sizes, and the 0.25" plate steel construction will never wear out.



On every pocket and key chain multi-tool I have ever owned the second most used item is always the bottle opener. Maybe I just like beer, but this tool was a necessity to me.
Handle
SPARtool's handle is designed for strength and comfort. The backbone of the tool is a .20" thick carbon steel bar, forged half round (think of a tape measure vs. a floppy metal ribbon of the same thickness) to fit in your hand. Inside the half round's curvature is an impact grade Zytel© polymer insert; which provides stiffness in the secondary direction, and is textured to give a secure grip.
The SPARtool sheath is built from 1050 denier ballistic nylon with MOLLE-compatible strapping and belt loop. The cutting surfaces on the shovel head are protected by a nylon and Kydex sheath which is fully detachable from the backbone of the sheath. The cutting surfaces of the prybar and pick are similarly protected with a Kydex guard, and are freely detachable with secure snaps. When in use, the cover guard for the opposite end is left in place and protects the user from accidental injury.  

So, it's a great looking tool, and certainly covers a whole bunch of options; a shovel, an axe, a saw, a pry-bar, a pick-axe and a hammer. It looks like a really serious and well put together tool. I can see a whole bunch of applications for both survival, breaching and entry, and even disaster survival. You'd do well to look at it and perhaps add one to your collection too.

Wednesday, December 2, 2015

Review: Mininch - Mini tool Pen and Tool Pen

Seen first on Breach Bang & Clear, here:

I am all for small, modular and resilient tools, and there comes a time when you just need to have a handy stealthy tool ready to go.

This is the Mininch - Mini tool Pen and Tool Pen set which I picked up via Kickstarter.

I opted for the full bells and whistles set, which included all the extra hex bits and both the new mini-tool pen, and the original tool pen.

They are for sale, live, here:
The mini-tool pen is milled from 6061 aluminum, sand-blasted finish. The tool itself measures 133.5 mm  / and is 12.8 mm in diameter  and weighs 46 g (with 5 bits inside).

  •  The bits are S2 tool steel and measure  35.6mm  long and 7.1mm in diameter. They weigh a mere 4.5 g apiece. The tool Pen mini comes with 18 bits: 
  • Slotted Bits (Flat): SL1.5, SL2, SL2.5, SL3
  • Phillips Bits: PH00, PH0, PH1
  • Hexagon Bits (Hex): H0.9, H1.3, H1.5, H2 
  • Torx Bits (Star): T5, T6, T7
  • Torx Security Bits: TR8, TR9, TR10
  • Square Bits: S1
  • SIM Eject Tool: 0.8
  • Pentalobe Bits: P2, P5, P6

The classic Tool Pen is made of the same 6061 aluminum, sand-blasted finish as the Tool Pen mini. It does however weigh 93g (with 6 bits inside) and measure up a hefty 150mm in length and 17.5mm in diameter.
 
Both tools are offered in Snow Silver, Gunmetal and Champagne Gold anodization finishes. I chose gunmetal because of reasons, ha!

The bits for the classic tool pen are 36mm long and 9mm in diameter   and weigh 7g each. The bits are not cross compatible between the tools, but given the ranges of the two, thats not really a problem.
 The classic tool comes with:
  • Slotted Bits (Flat): SL3, SL4, SL4.5
  • Phillips Bits: PH1, PH2
  • Hexagon Bits (Hex): H2, H2.5, H3, H4 
  • Star Bits: T10, T15, T20, T25
  • Imperial Hex Bits: H5/64, H3/32, H1/8, H5/32
  • Robertson / Square Bits: S1, S2, S3
  • Pozidrive Bits (Pozi): PZ1, PZ2
    Both the Tool Pen classic and the Tool Pen Mini feature magnetically closing caps, and a really interesting tool seating and shifting system.

    Inspired by “Pop-A-Point” rainbow pen & mechanical pencil,  the bits all sit within the tool, in hex-shaped lanes, each nesting into the base of the one above it, and held in place, top and bottom, but a steel ring, much like a press-stud is. You shift the bits by feeding another bit up from the back end, and along they go.  Each bit has the sheer support of the hex-shaped tool to support it internally, so they are really effective. You do need a full pen's worth of bits to make them effective, however.

    Cut-out windows in one face of the tool allow you to see the contents and order of the bits stored within, using a very clear icon engraved on the side of the bit. The magnets in the caps don't interfere with the bits, although they don't really effectively allow you to store the caps when using the tools.

    Between the range of bits offered, and the ease in which they all store, either internally for your most-often used sets, or in the solid, flip-top bit cassettes you can get a pretty wide range of tools in a very dense package with either of these tools, doubly so with both.

    This is super useful when traveling, especially overseas, when you might find yourself needing to get into something, fix, repair or open some technology that you can't reliably ask someone else to do so, and having a fully decked out specialty screw-driver set is simply brilliant.

    Wednesday, April 29, 2015

    Review: Dead-On Annililator 18inch Superhammer

    As first seen on BreachBangClear,  and now on to you.

    I wanted to get a full-on gift for a friend, one of the fantastic Dead-On Annihilator superhammers and due to a failure to read the details on my part, I accidentally ordered the 18" version, not the 14" version, like the one I already had. To make things right, I simply gave my friend the 14" he was already trialling, and kept the monstrous 18" for myself. It really is a beast.

    Probably too much tool for most people, at 1.9kg (3.7lbs) and 30cm (12") shaft with a 45cm (18") overall length. All the features of the 14" are replicated in the 18", just "bigger".
    Between the striking face and the "Nail Puller" the "Board Straightener" sits ready to grip and twist.

    The two sets of teeth are just over 4cm (1 5/8") and just under 3cm (1 1/8") in width, respectively, which fits standard board sizes for wrenching or adjusting.To be honest, I haven't had much use for this other than occasionally levering at a frame here or there. The hammer is good though, the face is wide and beveled giving both a good nail-driving action, without messing up the surface you're pounding on.

    Below the chisel edged Nail Puller/Tile Ripper lies the frightfully formed Demolition Axe, which curves down almost to the edge of the rubberised grip. This is not a shaving-sharp axe, rather that the steel of the haft is formed to a triangular ridge to an angle of around 45 degrees to the full width of the haft. This leaves a very hardy working edge, and is intended for drywall, thin wooden structures, shingles and conduit.

    The drywall-only labeled demolition axe seems to work well on particle board, and would probably make short work of errant wrists too. 

    The middle of the curve is notched with what appears to be a wire-stripper, but could also be used as a nail-puller as well. As the 18" version is just a heftier version of the 14", the angles are steeper, so it's not really sharp at all, but it is wicked solid. I can imagine that the warning is there for the same reason that coffee lids read "Caution: contents hot". For idiots who try to chop wood, or cut wiring with it. It wont do that, or at least, not well, or safely. Use the right tool for the job. It will make a mess of whatever you want to make a mess of though, so in that, its perfect.

    The pointy-end of the tool features several other interesting combination tools. The tip is a rugged ridged point, which could be used for penetration, or scoring as needed. Within the tip is the "Multi Purpose Wrench/Nail Puller", which as suggested includes a hex-bolt socket, and a wide feeding nail puller. The head of the hammer fits nicely in the palm of the hand to drive the spike home.

     The manufacturers suggest using the wrench for releasing concrete forms and other general uses and the tip for smashing, cracking and chipping away at tile, brick or other things deemed "to go away".  I like using it to punch holes in things for old fashioned "Here's Johnny" moments. Again, it makes a mess where needed.

     So, I felt it was a good idea to put the 18" Annihilator up against the mighty Stanley Fatmax Fubar to give a good comparison. However, at 1900g vs 1300g it already comes up significantly heftier. More so again than the 800g 14" Annihilator. This is a big tool, for people with big hands and big tasks. It's probably too much tool for me.  If you're in-field and cutting back every weight counts, you might want to consider the 14" over the 18", but if you are able to keep it in a vehicle, it would be a perfect  multi-function wrecker.

    They are really inexpensive, rugged and well designed. When it comes time for me to break my way into an abandoned warehouse, bust my plucky crew out of a cannibal mutants larder, or even just pop open packing crates and 44 gallon drums of fuel for the gyrocopter, the 18" Dead-On Annililator might well be the way to go.

    There is also fact that Shaddox Tactical make a Tactical Pouch for it, so I'm hooked.

    Sunday, January 11, 2015

    Review: RhinoRopework - MAD Stick

    Image from RhinoRopework
    Here is a brilliant bit of kit that I've managed to scoop up just in time for OCONUS Week on BreachBangClear, in a world exclusive.

    I've been buying a few things from the Rhino Ropeworks, like their tritium equipped fobs, and just recently one of their Saber ropeworking spikes. When I heard that this weeks topic was things done by foreigners, by foreigners, I dropped my mate Shane a line, and he sent me a prototype in the mail!

    Shane is no stranger to making tools that are up for some hard yakka, and I was only too happy to get RR's newest tool in my hands. Check out their Facebook page for all the latest work-in-progress.
    The MAD Stick is a 400mm (15.7") long, 12.7 mm (0.50" yeah, fifty cal!) length of 4140 high tensile tool steel, commonly used in pry bars. It weighs in at 340g (12oz). Very lightweight for what it is.

    The steel is heat treated to have a Rockwell 45-46 in the body, 60 at the breaker tip. That gives you all the flex you need for doing heavy prying tasks you might have on hand, without deforming the working ends.

    The two different ends give you two different functionalities. The double sided chisel point comes to a second, finer edge for the last 2mm or so, giving a nice robust wedge to use to work into gaps and crevices without the fear of chipping your tip. The primary grind is about 3.5cm (1.5").
    The opposite end is rounded to about the same length, and also features a primary and secondary grind. Good for all kinds of probing and hole punching.

    This tool, as my partner Omega said "is a metal stick of great evil. I like it" (and she knows a thing or two about evil ...). To top it off, the whole piece is covered in a black Cerakote finish although RhinoRopework can also get it coated in a variety of colours.
    The middle 5cm (2") of the bar is left smooth, but the rest of the surface is covered in a really bitey knurling. So bitey, in fact it is possible to use as a striker for Ferrocerium. Bloody brilliant.
    I generally prefer a ridged finish personally, which as it happens, RhinoRopeworks can put on one of these instead of the knurling, but I have to say, it's a pretty aggressive grip. I had no feeling of this coming loose in my hands, or in fact where I stowed it.

    This is helped along by the ripper little pen clip that is fixed to the MAD Stick, about half way.
    That little clip meant that I was able to slip the stick down the side of my PALS/MOLLE equipped pack, and even clip it to my Hazard4 RG Harness, and wander around the city with it slung under my vest, along my torso.
    That same portability would mean that this could be worn on a plate carrier, on an assaulters pack, or secured pretty much anywhere with a loop or lip.
    I'm no stranger to breaking things, and would stack the MAD Stick up against my Stanley FUBAR, the Dead-On Superhammer and the CountyComm Breacher Bar happily. They are all different tools, and this is no hammer, but it sure is a problem solver.

    Shane tells me that the MAD Stick was "inspired by digging tool used by foragers and the splitter bar used in AMC's The Walking Dead to kill walkers through the fence". Now, this isn't a spear by a long shot, but it's not meant to be. More like a MILSPEC Kali stick. I haven't had a chance to put it in the hands of my escrima practicing friends yet, but I can imagine they could bring a metric fuckton of hurt down with this.

    Besides being just small enough to secrete on your person (if that's your thing)  its compact size means another thing. If you are already wearing a fairly rigid set up, it's slim design will keep if from getting in the way, especially if you have 6 to 8 rows of PALS/MOLLE to slip it into. It virtually disappears down the side of a pack, and only pokes out a little on the front face of one.

    Once I got it home, I set to bashing, jabbing, prying and generally looking for things to test it on. I stabbed it into logs, and hit them, found cracks in brickwork behind the house and old woodwork to prise apart. Not a mark on the tool, and everything I tried it on succumbed. As expected, when used as a striking tool, length-ways, it resonated a fair bit, but it was manageable. 
    Without gloves on for my first round of tests, the knurling held fast, and I had great grip throughout my swathe of destruction. One thing I found was the pen-clip made for an uncomfortable place to hold the tool, and I needed to rotate it out of the way a couple of times, especially when I wanted to exert some more force.  Gloves sorted this right out however, and gave me the added padding to ignore this.

    Given its ease of storage, light weight and high functionality, I can see these being quickly being found in the hands and cars of EMT's, and other first responders, as well as anyone who might need "Method of Entry" tools in their regular loadout, without having to call out the big-boys like a Halligan Bar.

    For me, having a tool like the MAD Stick close to hand means that I can overcome a variety of problems in or around the house when I don't want to snap the tip off a knife or bend a screw-driver breaking up pallets to fortify the bunker.

    The MAD Sticks are only just now going into small-batch production, and the heat-treating and Cerakote process is time consuming, but any day now the first production models will be in the hands of the early purchasers. I have a feeling we might be seeing a lot more of these in the hands of rough men, standing ready.

    Tuesday, August 19, 2014

    Review: Tiletto - The Titanium Letter Opener


    I'm a firm believer in not only getting behind small business makers, but also adding more shinies to my collection. This was no exception.

    This is the Tiletto and is the creation of Steve Sure, who along with his trusty collaborators in the form of Mike Bond (of Ti2 Sentinel and Parabiner fame), Brad (of TiPik, WTF and TKMB pen  Tactical Keychains) and Philip Kaufman (of the ScrewGrabber project) designed a piece I knew right away that, with those peers,  would be a great project to get behind.

    Pay no mind to the CQB dagger beside it. It's a complete coincidence that their forms are remotely similar.


    Milled from sheets of Ti-6Al-4V, otherwise known as "Grade 5"titanium, these pieces are approximately 178 mm (7") long, 25mm (1") at its widest, and 1.6mm (1/16") thick.

    The Tiletto features chamfered sides that can act as straight edges for assisting in lines drawing or scoring, to cleanly tear pieces of paper, and to open letters, packages and parcels. I've not encountered a taped box the Tiletto can't safely get into in our regular deliveries.

    Either end of the Tiletto,  has different shapes / characteristics to use as a flad-head driver, or an improvised phillips head, and can also be used as a pry bar to take on small jobs such as car and can opening.

    Further adding to its functionality, the Tiletto features a set of wrench openings in its belly, with the inch-calibrated version offering: 9/16", 1/2", 7/16", 5/16", and a 1/4 inch hex-bit driver in the center.

    The millimeter-calibrated version offers: 13mm, 12mm, 10mm, 8mm, and a 1/4 inch hex-bit driver in the center. I got one of each, adding to Omega's keychain collection as well


    I've found quiet utility in having this too sitting in the PALS/MOLLE webbing of my  Hazard4 LaunchPad iPad sleeve.

    Following Steve's suggestion, I've even used it as  a fid on larger-diameter poly-rope, and have stirred my tea with it. It is an elegant piece, slimline and innocuous for  what it offers. As with many of my pieces, it is multifunctional and hardy. Although, best to be aware that whilst it is half as dense, and offers twice the tensile strength of 316 stainless steel, it isn't a miracle metal like adamantium. 

    Still, its a gorgeous tool that I am glad to have added to my collection and hope to give it a lot of use as the days roll on.



    Related Posts Plugin for WordPress, Blogger...