Showing posts with label kydex. Show all posts
Showing posts with label kydex. Show all posts

Thursday, February 8, 2018

Review: ZU Grunt

ZU Bladeworx Australia

I'm a sucker for a well made blade, and it's always hard to turn down an opportunity to add to my collection. I've been a fan of the ZU Blaadeworx knives or a long time and was already a proud owner of their Mekanix which lives in my IPad bag and goes most places with me as part of my EDC loadout. A friend loaned me his FFSK to review and it was sweet piece too. I've been lucky enough to follow along in the ZU Nation facebook group which is where other ZU owners congregate. This is where newreleases are announced and the pre-orders are advertised.

As the ZU Bladeworx business case revolves around small batches of blades being made and selling-out almost before production beginning, the best way to lay hands on a new one is to monitor the upcoming releases. So, when I saw the Grunt coming up, I thought I'd splurge a little and put my deposit down for a pre-release. A few weeks later and some production shots later, the "round 2" payment came due, and I started getting excited.

Once I had it in my hot little hands I was immediately impressed with its heft. At 220g (7 3/4 oz) it fits nicely into the niche the MSM-KA-BAR MSM-001 makes, size wise, whilst being a little less aggressively built. Sometimes you can have too much knife. The Grunt's skeletonised handle reduces the overall weight but maintains a lively balance and also allows for a variety of cord-wrapping options. The finger grips were not unlike those in the Mekanik, which were nicely finished so as not to tear up the naked hand.
The lines of the knife are very simple, almost plain, but that lives up to the Grunt name of the blade. Another similarity to the Mekanik is the grove running down the flat face of the blade on either side. This reduces the weight and would ad stiffness, on a longer blade, something the Grunt is in no danger of needing. its 6.5mm blade thickness is not playing around. This isn't a scalpel, its a pig-sticker. Like all ZU Bladeworx blades, it ships with wicked keen edge. Milled from high grade tool steel Cryodur 2379
 [D2] and then black nitride treated, after hardening to a Rockwell of 58-59HRC. these are hard-wearing blades.
I'm not one to abuse my knives, and save from an occasional battoning I see a a knife like this as a cutting, slicing and chopping tool. If you need a pry-bar, or a hammer, get one! That said, once I mounted the Grunt to my hiking and adventure "battle-belt" with its supplied updated Blade Tech Tek Lok spring-loaded locking belt fitting. I've used the older Tek Lok and this was a marked improvement, nicely paired with the knife and its kydex sheath.  It was so comfortable I went out shopping a couple of times with it on my belt not even realising. I managed not to land in any legal trouble, but thankfully no one at the hardware store cared I was sporting a hefty fixed-blade on my hip. That is actually a good point. for all its mass, he Grunt is not a large knife. It's a sensible size for sensible jobs. I take it camping and frequently do some camp-craft with it. not only food-prep but whittling and kindling making, I've also used it for crafting pot hooks and fire-tending sticks.

The blade features jimping on the spine and a notch forwards of the guard to allow the user to choke up the grip for fine work.

Here's a little bit about ZU Bladeworx, because  I think they're a really  interesting company with some important and relative contacts: They are an Australian owned an based manufacturer of Close Quarters Combat equipment and are a trusted manufacturer to the Australian Army. They have an ADF issued Roman Vendor Number.
They work closely with Australian CQC experts including Paul Cale and Ray Floro, both who are internationally renowned hand to hand combat experts. Paul and Ray are both CQC subject matter experts to our own Aussie Army and foreign allied armies.
Their products are either made in Western Sydney, NSW or North Brisbane, Queensland. All our products are legal under NSW and Queensland state weapons laws for civilian ownership. "Legitimate reason for carriage" is an important phrase. 
Most of their knives are limited edition and include the following;

There is an active collector community with a brisk buy/sell/trade philosophy in case you particularly want to get in on the action.

These are a solid, no frills, hardy blade, good for hard use as well as delicate and fine tasks. Deliberately engineered and superbly finished, these striking blades are both a collectors delight and a prepper's mainstay.





Tuesday, October 10, 2017

Review: Appalling Mall-Minja wall hangers!


Originally posted as part of Breach Bang Clear's ongoing Monday Night Knife Fights series.   

I talk about good knives, swords and axes a fair bit. I'm fan of dense steel with an edge. There's a lot of it out there, some good, some amazing, and some unspeakable trash. It's the latter stuff I want to discuss for a bit.
Lets talk Mall-Ninja wall-hangers. First you might ask, what's a mall-ninja?
A mall ninja is a breed of weapons and combat enthusiast characterized by being so ungrounded in reality as to make even the most hardcore gun nuts shake their heads. Equal parts naïveté, delusion, and obnoxiousness, the mall ninja contributes to countless ill-informed online debates concerning arms, armor, and warfare, and is a common consumer of assorted paramilitary woo, broscience, and shared misconceptions about history and the world. The term "mall ninja" is pejorative; no one self-identifies as such. We hope.
If you're worried there's a simple test you can take to assess your-mall-ninja status.   Good luck.
Now, if you're an avid Master Ken of "Enter the Dojo" disciple, you've probably had all the training and experience you'd need to make your own correct choices when purchasing your own pointies.
When it comes to some real Mall-Ninja wall hanger blade there are some key aspects that seal the classification:
  1. Black. Real Ninja's need black weapons for their Tier One Wet Ops. Powder coated, painted, teflon coated, oxidised, it doesn't matter.
  2. Cord-wrapped handle. Every real street-samurai wants their blade wrapped samurai style, and that means cord-wrapped.
  3. Curves. Like every bad-lady out there it has a curves and every mall-ninja want's a bad lady of their very own.
  4. More curves. See Above, but unnecessary curves are even better.
  5. Extra cutting surfaces. Primary edges aren't very high speed-low drag. For true body-dropping power, you need blades on all faces.
  6. Unnecessary serrations.   It's not a sharks mouth, buddy, its a knife. You need a chainsaw, get a Husky!
  7. Tactical sheath. Drop-leg, back-scabbard or just "ballistic nylon".
  8. A scary name. "No one would surrender to the Dread Pirate Westley."Add a few "NINJA, ZOMBIE or DEATHs in there for good measure.
However; there's a lot of shiny bling out there. Here's a quick guide to some examples.


A - Zombie ass kicker. This is a bad-assed blade, but a serious wall-hanger. Extra serrations, extra edges to catch and snag, it's styled after the Aztec war swords to look extra scary. Ribbon-wrapped rather than cord, and a pretty thin, light steel. I don't have much faith in it's utility.
B - Living dead apocalypse full tang ninja sword.  Twin blades are better than one, obviously. Extra curves and serrations along the non-striking edge of the blade, as well as holes cut into the blade to lighten it, adding weakness.
C -"Hunting Knife." Perhaps if you're the Predator tracking Dutch and the other Rescue Team members.. This no-name piece  actually performs pretty well, regardless of its extra curves, useless serrated spine and extra holes. Its "full-tang, one-piece construction" is quite sturdy and the cord wrap handle well done. It's pretty well balanced, well finished, and were not for the extra holes and the saw on the spine, it might not even qualify as a Wall-hanger for Mall-Ninja's were it not for the dual shoulder strap back-holster  and the extra holes.
D - Black legion undead machete. Scary name, and wicked post-apocalyptic hammer finish. Now just add to the list the impressive looking spiked knuckle-guard, the "zombie-green' cord wrap and the drop-leg sheath and you've a "take-em-all-out before they getcha"special to scare mom with if she ever busts in on you practicing kata in the basement. water-bottles and melons of the world beware. To be fair, the blade appears to be well made, but the fitting are a tad flimsy for my tastes.
E - Z-hunter-axe. Not really an axe. Not really a hunting knife. Unnecessary saw-back serrations, extra curves and hooked edges. Great cord-wrapping and a single piece of steel for resilience, with sick jolly roger logo for extra-scary pirate aesthetic. Maybe if you're going from to room on a beached Somali cargo ship? I have a feeling it wouldn't  serve too well dressing a water-buffalo either. But zombies? narp.
F -KA-BAR War sword On first glance, this one looks like a prime candidate for Mall-Ninja wall-hanging.   It's got some curve to it, a lurid green scale grip, for extra zombie killing power, and a fully decked out nylon thigh sheath. However, its a serious work horse of a knife, but the scary name, and green scale gives them the potential for Mall-Ninja wall hanging.
G - Ontario Black Wind. Not every Mall-ninja wants a blingtastic katana straight out of Highlander or Blade. Some might prefer a more-or-less traditional "ninja-to style" short, straight and heavy sword, which is exactly the kind of blade that the Ontario Knife Co. put into Army Disposals and into the pages of martial arts catalogues. This is a bad-ass blade, undeserving of any scorn, and is in fact one of my go-to blades in the event of Apocalypse or civil unrest.  Even with its high-speed looking kydex scabbard,  just too good to be a wall-hanger.
H -Cold Steel Gladius. Last up from my own collection is the hungry-for blood Gladius from Cold Steel. Now, even the mighty Roman armies had their own groupies and  modern-day hangers on, thanks to a steady stream of "sand and sandals" action pictures. The humble Roman ground-pounder was issued one of these Gaul-stickers and bade go forth and pacify the Empire. The modern version hanging on my wall would have been a high-tech marvel of construction but fit in nicely in the shield-wall. I don't recommend trying to take that angle when trying to explain why you have one lashed to your hip with your Company First Sergeant, but, if you wanted a big ass blade for defending the empire "outside the wire" you could do a lot worse than one of these.



Lets take a moment to talk thickness. Cheap blades are often cut or pressed  from sheets of thin steel. This doesn't offer much cutting mass, strength or rigidity, all things I would want in a fighting blade. Different steels have different densities so its hard to gauge what steel is in the kick-ass zombie slayer you found at the disposal store, but the thickness of the blade can be a good indicator. I've found the thinner the blade, the less likely to be a practical tool (unless you're cutting sushi or shaving).



So. My last bit of advice to prospective blade collectors: Buy quality. It needn't be expensive, but should be from a reputable maker, be it a big company or a small smith. Be sure to give your new-found tool a run through its paces, before staking your life on it, (and get some formal training if possible). Don't be a mall-ninja.

Monday, June 13, 2016

Wish-Lust: ZU Bladeworx Nomad

This is a follow up from a piece I covered last year, the ZU Bladeworx Mechanik straight edged blade, and their Raymond Floro Karambit which I covered at the beginning of the year.

ZU do small batch runs of their knives, usually on pre-order. They are an Australian owned and operated edged tool manufacturing business, who specialize in CNC manufactured, industrial strength, edged tools. All their products are 100% Australian made, with the entire fabrication process being local, from the initial machining right down to the final edge sharpening. They use high impact tool Cryodur 2379 (D2) steel for all their knives.

This is the Nomad, their new piece, the blade is 10.2cm (4") long and 0.6cm (1/4") thick. The handle is just over 4" long and just over 1cm (3/8") thick. A deep fuller down the blade and a skeltonised handle of this single CNC milled-piece cut the weight down to just 147g (5.1oz) without sheath, even with the large ring at the pommel.



The Nomad, like all the ZU Bladeworx blades are double tempered and cryo heat-treated with a black oxide finish (although there is an optional battleworn finish which is rubbed down black oxide available).

Double edged, this is a serious fighting knife, and comes with a kydex sheath with a friction lock. Being double edged makes it a dagger in Australian law, so be advised if you are intending to get one, and be aware of your local laws, but there''s no denying it's a rugged looking piece.

All our ZU Bladeworx'  tools are warrantied against manufacturer defects and damage during normal use. They expect their tools to be able to handle abuse, but you need to be sure to remember the warranty only covers against reasonable use, not deliberate abuse! They are hard tools, for hard use. My Mechanik doesn't get nearly enough use, but when it does, I know I can depend on it.

Wednesday, April 6, 2016

Review: SAR GlobalTools - kiridashi



The traditional kiridashi knife is small and very portable blade from Japan, with a chisel grind and a sharp point, used as a general-purpose utility knife. These knives are carving/utility knives have their roots in woodworking. The name, kiridashi literally translates to “carve out” which would seem to support this origin. Regardless, they are found in many facets of traditional and contemporary Japanese culture being used in a variety of activities from everyday tasks like sharpening pencils to gardening.


They are often made with a handle wrap and sometimes scales and a scabbard, but are just as likely to be a single piece of steel.

This take on the classic is from my mate Spencer Alan Reiter of SAR Global Tools who works his metalworking magic from a shed in Louisiana and has brought forth such wonderful items as the Moonglow necklace signaling tool I wear 24/7, the SESS signalling dogtag I keep lashed to all my packs, and my favourite neck-knife, the OddJob.

The SAR kiridashi's are all one-offs, that Spencer builds from reclaimed stock left over from his other projects. Waste not, want not, and perfect philosophy for the creation of a kiridashi. The riddle of steel  rings in his ears.

Crafted from an offcut of CPM3V and is heat treated to a hardness of "dead nuts" 60HRC according to Spencer.
It's also sharpened to a razor blade edge along both its main cutting edge and to a very sturdy and substantial point. The geometry of the SAR kiridashi is is very similar to a scalpel and being one piece CPM3V its 165mm length it weighs only 30g, very dense and very good in the hand. With two holes drilled in the head of the blade for a mass reducing effect and three grip-enhancing drilled notched behind the head, and another in the tail end as a lanyard hole.


Worked over in the SAR workshop, you can easily use it knowing that you are using a high quality product.  You'd never know it was a one off recovered from workshop scrap. In keeping with the kiridashi's main purpose originally to be used as a craft knife, I wanted to show off it's practical application and the single, flat ground chisel edge which just works a treat as a wood whittling tool.

The blade can put it to many different uses. Here are some practical examples: general cutting, gardening, cutting zip ties, deburring and drilling holes, self defense, survival tool, the uses are almost innumerable. Anything you could want from a heavily over-engineered craft-knife. 

The SAR kiridashi's are set with a cord-wrap on the handle for enhanced grip on the thin metal spine, and come with a kydex scabbard along with a bead-chain necklace for neck-knife wear. 

Bear in mind that these are all hand-crafted, heat treated and sharpened in what is essentially a one-man shop, along with Spencer's philanthropic work in conjunction with the Run Rangers Run charity, in creating his Inglorious Bastards knives, re-purposed from antique files, so his time is hard to come by and the runs are small. Keep an eye out and be on the lookout for new knives such as the Kingfisher's that are coming out...

Wednesday, January 20, 2016

Review: HHA Razorback CQC knife

Following up from my recent review of the ZU Bladeworx FFSA knife loaned to me by a friend, I wanted to do this second blade he was kind enough to sling my way, the equally interesting HHA Razorback CQC. I'm a big fan of the chunky and no-nonsense badassness of the Hardcore Hardware designs, especially the LFK blades that my partner Omega and I both have an example of  as well as the TWI pen that is in my EDC.

It was really interesting to see what HHA are calling their "first signature blade in the fighting arts genre," but I'll give it the same caveat that I gave the FFSA, this kind of knife is not the kind of tool I've trained and sparred with in the limited knife-fighting training I have done, but I'm happy to tell you that it is certainly an impressive piece of steel.

Featuring the same 6mm (0.236") thick, full tang, D2 tool steel blade, as all the HHA blades this back-swept, double re-curved blade features two hollow ground faces on the sharp edge, and another on the spine of the blade.

HHA report that it is engineered for slashing, thrusting and trapping, and designed for the same type of the reverse grip as might be used in Arnis (but again, it's not my martial field of expertise).

The combination of live and non-live edges however makes the Razorback gives you the opportunity for both both offensive and defensive techniques. For expanding on those blunt force, defensive striking and less-than-lethal applications, the Razorback also has an extended glass breaker, strike/hammer pommel, in keeping with their other designs.

A large finger notch is devised to ensure a secure grip to increase weapon retention substantially, and I found it rested in the edge of the hand really nicely in that reverse grip.

The knife is 235 mm (9.25") overall, with 115 mm (4.52") of that being the blade, and is 368 g (0.81 lb) of hungry steel and G10.

To reduce grip weight and optimize balance, both the tang and handle scales have been skeletonized, with a cavity in the handle which could easily double as a hidden storage space for emergency items. However, those scales are secured with Torx screw all steel fittings, so you might find it difficult to pull of a Jason Bourne style recovery without that particular driver.

I found the backwards sweep of the blade a little difficult to adjust to, mostly because I wasn't sure of the arcs it was offering me, but it certainly felt good in the hand whilst moving it around.  I imagine in a practiced set of hands it would be extremely dangerous.
When held in a forwards grip, the blade was no less dangerous feeling, and I certainly didn't have any trouble cutting with it, though I didn't care for the broad double-recurve  of the edge and handle combination.  No fault of the knife, it's just engineered the way I like a knife to be.

With its ambidextrous Kydex sheath, with a Tek-Lok belt mounting system it can be customised in vertical, horizontal or angled positions to suit your rig, or even lashed via eyelets. It also comes paired with a BlueGun style HIVIZ blue trainer, which matches the blade in weight at 369 g (0.81 lb), but with thoroughly safe edges and points. I'd have no qualms training with it, and letting enthusiastic people pretend to do me harm whilst getting better at using the real thing. 

All in all, the Razorback is a substantial, solid, scary-looking and well thought out blade, that just isn't right for me.

Tuesday, January 12, 2016

Review: ZU Bladeworx - Floro Fighting Systems Knife


As first seen on Breach Bang & Clear....

One of my good friends let me know, ll beaming smiles and swagger, that he had landed a beauty of a knife, in the ZU Bladeworx Floro Fighting Systems Knife, and was kind enough to lend it, and its accompanying trainer, for me to put together a review. Now, I'm a firm believer in having the right tool for the job, and also in having a fine, rugged and dependable blade to hand when the need arises. As it turns out, I had already been eyeing off one of the other ZU Bladeworx knives, so this was an excellent opportunity.

The Floro Fighting Systems is a system of edged weapon combat and defence that is reported to be not only simple to learn, but one of the most effective systems of self defence available today. I've not had the pleasure to attend any of their training, but the friend of mine who lent me the blade suggests they are fully legitimate.

Billed as efficient, direct and immediate, FFS is one of the very few styles that is still based on the blade, and is used by civilians and members of the military, and law enforcement agencies worldwide.

Reported to have over 30 years of experience, Floro has instructed internationally: US Special Forces, Korean Special Forces, various SWAT teams, and the New Zealand Police and nationally members of the Australian Federal Police and Military have individually sought private instruction. So, it seems the FFSK comes from a pretty grounded fighting system, so you'd expect their blade to back that up.

The blade itself is a karambit style knife, blended with a far straighter blade shape than those of the 5.11 Tactical Tarani CUB or the HHA-LFK01 far more like the Fairbairn-Sykes fighting knife.
The FFSK is 235mm (9.25") long, 100mm (4.5") of which is double edged, hollow ground blade. The blade comes to a very severe point. A deep fuller ground into the middle of the blade lends rigidity as well as dropping the weight.  Be very aware of the legal ramifications of your knife ownership and carry ramifications.

The 10mm (0.4") thick blade is cut from a single billet of A2 steel which has been double tempered and cryo treated to a RC58 hardness. The blade itself has been ground down to be 6.5mm (0.25") thick and a couple of holes have been drilled in the handle both to reduce weight and to add lashing cords should they be desired. It weighs in at around 200g (7oz) which is (33% lighter than the other ZU knives, the Punisher and 14% lighter than the Ghost), so it's a lean, mean fighting machine, Cerakoted in sniper gray.

The large ring at the butt end of the knife, in keeping with traditional karambit design generally being for the index finger to fit through. This can be used not only to retain the knife, but also as an impact weapon, to add force to a punch or as a hammering attack.

I was told that the Floro fighting system has a lot of punching style strikes, which seems to fit nicely with the traditional butt-ring acting as a knuckle duster, and the forwards sweep of the blade presents the edges for slashing or stabbing strikes nicely.

The blade comes with a kydex sheath which includes a clipping belt loop, and offers a snug fit for the bade, and is adjustable for left or right hand draws, it is set up to wear horizontally.

This is the official knife of the Ray Floro Fighting Systems syllabus and ships frighteningly sharp, sharpened in-house by "Dirty Harry", with the blade being designed and built in Australia. Even though I am unfamiliar with this kind of knife style the blade is very nicely balanced in the hand, and certainly feels like something you don't want to mess with. I can't say I like the cant of the blade, personally, but I can certainly see the intent behind it.

One other thing that I was both surprised and concerned about was that the accompanying trainer is really quite sharp. The Benchmade SOCB CQB trainer was weighted exactly the way the live-edge blade was made, but was fully blunted for some pretty serious full-speed stabbing and slashing action. The ZU trainer only weighs 60g, made of anodised aluminium but is every bit as pointy as the live-edge blade. I wouldn't want to do any training with this any faster than I would with the live blade.  I'll leave that to Grand Masters and Jedi alike.

That all said, this is a fine knife and it certainly appears to be very purposefully designed, bearing the ZU Bladeworx "sterile" appearance and no-frills rugged design. If you're likely to be using a Filipino inspired style of knife combat, you might well be interested in this blade.


Thursday, December 31, 2015

Review: ZU Bladeworx - Mekanik


I got in touch with the fine and fierce minds at ZU Bladeworx, who are based in Rouse Hill, NSW, after seeing some of their handywork on one of the groups I frequent on FaceBook, and was delighted after making introductions and inquiries after one of their fine blades to be sent this particular piece, right before Giftmas.

These pretty-much local bladesmiths have a very straightforward approach when it comes to making stabby steel: make it simple, make it elegant and this they have done in this piece, the Mekanik.

Being 100% made in Australia, and  machined from a solid billet of 15mm thick A2 steel (very similar to another tool-steel, cryodur 2363 is the steel from Germany). The handle is 9mm thick (0.35")  and the blade is 6.5mm thick (0.25") and weighs a meaty 110g (3.9oz) for its mere 174mm (6 7/8") length. 

Given its A2 construction, its no surprise that it has a skeletonised handle, and an additional pair of holes drilled to keep the weight down, as well as fullers ground into the sides of the blade as well as along the spine.
 Double tempered then cryonically treatment to a Rc58-59 hardness, it has been black oxide finished and shipped "sterile" (no blade markings)  to keep a spartan presentation. 

The Kydex sheath is done in house  and fits like a glove. plenty of attachment grommets and with the addition of the paracord lanyard, it can be easily drawn even though the scabbard comes up along deeply up the handle.

Jimping along the back and front and butt of the handle gives a really solid grip, in even some mango and/or fish slime covered tasks. The front finger groove allows you to take a very firm and stable grip. The edges are all smoothly finished, keeping you from giving yourself a grazing when making sudden, vigorous use of the knife.

One of the things I really liked about the design was the gradient between blade and handle, working down from a nicely wide grip, to a serious, no-nonsense 65mm long blade. 


Sharpened by "Dirty Harry", the blade is a compound grind with deep fullers. The main edge of the blade is machine hollowground with flat grind tip. the A2 steel holds a good edge and will be one of my first attempts at old-fashioned stropping for a razor finish.

When gripped neatly in the hand, the butt fits just outside the heel of my palm, and I have had not a worry with my hand sliding forwards whilst cutting, slicing or stabbing with it. 

ZU reports that the Mekanik is in use with several deployed Aussie soldiers (infantry and SF) via private purchase, so if you're deployed out somewhere unpleasant, keep an eye out for it on a steely-eyed digger with or without a beard. I'm really impressed with it and fancy it a keeper, either for plate-carrier or battle-belt wear. The broad flat scabbard makes it a bit too awkward for boot-wear, but don't let that stop you.

Monday, May 11, 2015

Review: Rhino Ropeworks - Hornet marlin spike


I do like a tool that has double duty. This is the Hornet from Rhino Ropework which I commissioned in both its olive green Cerakote, but also with a custom kydex scabbard.

This marlin spike is part rope working tool and part CQB weapon. Milled from marine grade 316 stainless steel right here in Australia, the Hornet is a smaller sibling of the Mad Stick, which I covered a while ago, and it's heft and no frills design is indicative of this.




With its grooved body, the Hornet is easy to grip, and the working end, which is separated from the body of the tool by a deep notch, tapers down to a working tip, which whilst not sharp, is a solid rope working end.

The 316 stainless steel makes for a good tool, for the kind of work it is designed for. Weighing in at 110g (3.9oz) and measuring
180mm (7") in length, and 12mm (just less than 0.5") in diameter the Hornet is a substantial tool.

I've used the tool for working knots, as fits its purpose, but I have also find it useful for a variety of other tasks, from flipping steaks on the BBQ to punching holes in cans.

The Cerakote coating adds further to the innate chemical and wear resistance of the steel the Hornet is made from, but I managed to wear it off the tip all the same in my testing and regular use. It's still smooth and fit for purpose, for all my abuse.

One of the nice additional features is the lanyard hole, which whilst a tight fit for even this lacing cord, would probably manage to feed paracord through it, with some careful melting if the end and some hard work.

As a marlin spike, I've found the Hornet is both robust and substantial. Its easier to work with than the clasp knife one I have. The angle of the spike allow you to really get some leverage into the splicing and loosening knots and other rope.

The tip is rounded so you don't have to worry about digging into the threads of cord you're working with. It works really nicely with paracord, as well as higher diameter cords and ropes. The tip isn't really suited to cords much finer than that, a 5mm dummy-cord is pretty much the finest I have managed to use it with.

It's a treat in the hand, the beveled tail-cap fits in the palm nicely, and the groves are slight enough to not grate on the fingers, but sufficient to grip the tool for even the toughest knotwork.

I received a tan Kydex scabbard in my package from Rhino Ropeworks, which was fitted by a third party, and I'm afraid to say that it isn't as well fitted as I might have liked.

It has a pinch-point around the mid-notch , but it just isn't -quite- tight enough. No fault to Rhino Ropeworks, it's just a very tight design, with very few features to "catch" on a friction lock.

I have used the eyelets to lash it to my American Kami Super Colubris and it has been a faithful accessory as my belt-carry when I am adventuring. It's proven itself useful in a variety of settings, and I'm glad that I have it.

Friday, January 17, 2014

Review: Boker-American Kami MidTech Colubris

I was very fortunate to be able to take part in the Boker-American Kami pass-around program, after responding to a call by D.J. Urbanovsky. This was for the production level Colubris MidTech, the smaller sibling of the American Kami Super Colubris, which I reviewed recently. D.J. teamed up with German knife-making company Boker to "upscale" his bespoke knives, and they came up with this as their cooperative piece.

Here you can see it above the Super Colubris, on my Hazard4 Launch Pad iPad sleeve

The Boker - American Kami MidTech features the same G10 scales, with the American Kami logo formed into the scales to act as a very functional gripping surface, along with the hollow bolts that were also a feature of the Super Colubris. As is the protruding butt-end of the full tang construction. Nothing like an impact tool to make your displeasure known.

My pass-around was individually numbered 0074, and arrived in a lovely display case from Boker, along with a note for the fellow who had the blade before me, apologizing for the broken belt clip and furniture. The loss of that clip was moderated by some lovely stickers they had included. I got straight into testing.

Without the belt loop, I rigged a cord lashing system, inspired by D.J's own YouTube safety and carry clips. I wanted an "outside the pants" carry, to have on hand as a utility knife as I worked around the house.

The blade itself is tremendous. Rather than the CPM S35VN
steel of the American Kami version, the Boker is from 440C, a very serviceable steel.  The difference between the MidTech and the Souper is almost entirely in the blade section, with the MidTech having a 10.8cm (4 1/4") edge, with the same modified Wharncliffe geometry, just shortened. It has an overall length of 22.5cm (8 7/8") and weighs in at 225g (8 oz). Two inches less blade than the Super Colubris, but still a capable and impressive tool.



I had a great time testing this blade, I ran it though all my usual knife tasks; I did kitchen things, I cut cords and rope, opened boxes, I even wrapped my families Giftmas presents with it. The stonewashed finish gave the blade a nice sheen, and stacked up nicely against the finish of the Super Colubris nicely. It cuts well, and the width of the blade was still suitable for medium delicacy tasks.



I also took the knife out into my back yard to give it a workout in a more stressful setting, namely hacking back the noxious vines that were invading my kids trampoline. You can see here the effect it had on those vines, with both slashing cuts, and pulling cuts being effective. I was able to maintain a very good positive grip on the blade, and it went right where I wanted, every time.


I also took it out hiking with my family, when we visited a scenic National Park, to give it a carry-test. Now, before anyone gets all concerned, no, there isn't anything to be afraid of in our National Parks here (not if you've liberally applied Vegemite to your heads, to ward off Drop Bears. I just wanted to go hiking and see how it felt. I fitted it to my Hill People Gear Runners bag and off we went. It wore like a treat. It's length molded nicely to my chest, and the weight was insignificant. I carried both Tactical Baby and Triceratops Girl up and over boulders and across creeks with it on me, and never a pinch or poke.

This is a really nice, very affordable addition to anyone fixed-blade collection. Super functional, sharp and rugged, with great geometry, hand-fitting and with a variety of carry-options.
Related Posts Plugin for WordPress, Blogger...