Showing posts with label boot. Show all posts
Showing posts with label boot. Show all posts

Monday, June 15, 2015

Events: SSAA SHOT show 2015



I attended the Sporting Shooters Association of Australia (SSAA) Shooting Hunting Outdoor Trade (SHOT) show in Melbourne over the weekend of the 23-24th of May.

It's a big trade show that cycles around Australia, and is in Melbourne every two years. I went two years ago, and reported on it here.  It seems to be only a small shade on the big Las Vegas events put on in the US especially when you consider the BreachBangClear coverage.

That said, I had a good time, and got to see a lot of cool stuff.

I will just give you a few lines here and there to go with the pictures, and the like, as there was a lot to see at the hundred or so stalls, with everything from taxidermy to targets, bow-hunting to rifles and scopes.

The focus was almost entirely sporting shooting and hunting, as there isn't a big tactical and personal defense market in Australia.

 The Beretta stall had this display of pistols, with a variety of their pistols from the M92 range, as well as some old cap-and-ball style too. It was really nice to see the old along side the new.



















This big bad rifle from SAKO (in 308WIN or 338LM) caught my eye. I've always been one to lean towards "bigger is better" when it comes to my arm-chair firearms assessment.

Weighing in at over 6kg, (13.2lbs) this was a big piece.









There were a variety of different gun-dealers, (go figure) and Gun Emporium was one of the big ones. All manner of hunting and target rifles, and kit. 

Here's a very cool little gun that I saw, a folding skeletonised folding Rimfire rifle, in 22LR or 22WMR, the Little Badger. 

This folds up into  a small package and comes with its own nylon carry-bag. Perfect for a pack in the wilds, or if you're gong to be salvaging in a wasteland.







Blaser had a impressive lineup too, some very well made pieces on display.


LEGear had a stall again, filled out with all the 5.11 GEar I've come to expect. No new gear that I noticed, but their heavy winter coats look good.
I met up with some of my mates from Q-Squadron ZERT .

I hadn't ever met these guys in person before, but it was a great chance to shake hands and out faces to names. ZERT on!

 I had a good drool over the Accuracy International rack. Some very fine looking pieces of nail drivers there.

I especially admired the thumbhole grips, which were a modular design accessory for these pieces. Again, offered in the big bore 308WIN or 338LM.


As well as all the rifle sellers, there were numerous hunting and trecking suppliers, as well as archery and bowhunting suppliers to browse.
There was no shortage of things for sporting shooters and hunters to peruse, but it was all very light on tactical or survival gear.
I did get to play around on the ATV's on display, thanks to Polaris, and if I had significant disposable income (or some actual practical need) I'd be well tempted. They offered singles, doubles and even quad-capacity vehicles, for all your dune-jumping and mud-bashing needs ...

One of the most tempting items I saw for sale were the new boots in the MUCK boot company range.


Waterproof, ruggedised and comfortable, they have three new boots, and well worth looking at if you find yourself often in wet, cold or sloppy conditions.















I was delighted to see Platatac having a stall, and got to catch up wit hthe guys, who showed off the HHA ASOT-01 again, but also had on display their just-about-to-be-released stretcher pack.










This innocuous sustainment and medic's pack comes fitted with a variety of external and internal loop-field and PALS/MOLLE attachment options.

The magic is in the pull-away top and bottom panels which deploy a last-ditch stretcher for rapid CASEVAC. I saw these in the factory months aga, and they're getting ready for retail sale. Stay tuned!

I also really liked the looks of the Warwick Firearms AR-looking straight-pull bolt actions, an Australian company.
 
These are offered in .223 and .300 BLK chambers, with three barrel lengths and two different upper lengths. They build these to spec, so if you're in the market for a very professional looking piece capable of being fitted out with all the bells and whistles, you might want to give them a look.











Always a sucker for big-bore, I spotted a Barrett M98b in .338 Lapua in the Clatton Firearms display.

Such a size-queen ...

having not brought myself to capture any of the Barbi-Pink camouflage on display "for the ladies" and enplaned to the horrified, practical and ever fashion conscious Omega why Blaze Orange can be a legitimate stalking colour-scheme, we agreed that we'd both prefer Real-Tree or one of the more widely accepted military patterns, she was delighted to come across this dapper sporting shooters outfit at the Beretta stall.

Not quite my thing, but, she's someone I'm willing to make concessions for, there weren't many other partners in attendance at the SHOT show, and perhaps sporting shooting and hunting is mostly a boys-own club, but I'll take capable and engaged family in a survival situation any day!

I enjoyed the SSAA SHOT expo this year, and made some good contacts, which will hopefully be fruitful and informative in the weeks to come. Stay tuned!



Wednesday, August 6, 2014

Home Front: LEGear - 5.11 concept store

One of the places I look to for my kit is LEGear, an online store for Law Enforcement, Military and Outdoor products in Australia and New Zealand, who refer to themselves as a  “One Source – Total Solution Provider” for government needs. In June they opened a third brick-and-mortar store, this time in my home town. 
In both a soft-launch and grand opening, the good folks from LEGear, opened their doors and hosted a BBQ, as well as spending time answering questions about their stock.  

I have covered a bunch of kit I've bought from and/or received for review from LEGear before, such as my much loved First Spear Oagre vest, a pair of Blackhawk pants and shirt. I sought out the LEGear team at the SSAA SHOT show and met up with the folks from Fenix through them. 

It turns out that the Melbourne LEGear store is also a 5.11Tactical  Concept store.
Avid readers will also recall that I have a soft spot for 5.11 gear as well, with a collection of their ATAC A1 flashlight,  the CUB Karambit and several different styles of their pants. I also got to meet 5.11 CEO, Tom Davin, who was responsible for the Tactical Kilts going into production. Was a real treat to talk to him, and even got to put in a request for Kryptek as the next pattern choice they might look into.

So, all you Melbournites interested in the full range of 5.11 Tactical gear, from boots to bags, belts and clothes, as well as Fenix lights, and Benchmade blades go check it out! 

A full range, all the colours and sizes on hand.

Boots, Boots, Boots.


Thursday, June 5, 2014

Review: Exoskel shin guards

I love armour. I love scrambling and climbing. I love not bashing my body to pieces or exhausting myself.

So when I saw these awesome pieces on SoldierSystems I knew I had to see if I could get some too. Stephen Guiney of ExoSkel was kind enough to get back in touch with me and as it happened was traveling on my side of the planet, and hooked me up with a pair. I've worn a variety of shin-guards in the past, through both my LRP days, roller-blading and when I've been doing a variety of adventurous things I'd rather not crack a shin whilst doing. I've worn several different kinds of knee-pads in the past, but these are something entirely different.

These are the Exoskel X1's (X2 being the production model on sale now).

Constructed from an advanced polymer, with closed cell foam backing and heavy duty stirrup strap, buckles and webbing and Fastex-type calf straps, these are some very rugged and rigid shin pads, which come in at only 500g (1.1lbs) apiece. They come with Self Extinguishing Fire Resistance, which is UL94 VO rating.

The most striking aspect of the guards is of course the five rows of teeth that make up the face of the guards. These are sculpted directly into the face of the guard, each with a downwards facing slope and butted tip, these are designed to grab and hold any surface that you happen to be scrambling over.

Where in regular climbing situations the usual rule is "3 points of contact; feet and hands only" in practice, and in stressful situations this goes right out the window. When going through a window, up a ravine, over a wreck or refuse, knees, shins and elbows all come into play. That is when something like the Exoskel's come into their own.

The guards (teeth, buckle, stirrups) hold in excess of 450 kg (1000lbs) when vertically loaded, which is equivalent to a drop of 150kg (330lbs) from 50cm (19"). The good folks at Exoskel went as far as to explain these figures as the following: "The measured strength of the dynamically loaded Exoskel products tested was higher than the maximum dynamic load estimated for an assumed in-field loading scenario with a 330 lb (150 kg) user and a 19 in (50 cm) drop onto a hard object."

A 50cm drop is a long way to expect any wearable piece of retention gear to take when that laden. My 215Gear Retention Lanyard is 17" long and stretches to 26" meaning you are limited to a maximum of a 26" drop, and that is a dedicated safety line. These are not designed for that kind of thing.This is a climbing aid, not a safety tool.


In fact, Exoskel stress their product is to be used for stabilization assistance and lower limb protection only. It is not a climbing safety device or harness.

That said, I was quite happy with dangling myself off a packing crate with a shin on each rung, no problems. I have tried them on a variety of surfaces and materials now, and have been really pleased with both the bite and stability of those teeth. Where normally I've felt the need to kneel up onto a surface, committing that much of a lunge to my ascent, being able to go "half-way" with a shin gave me a lot more scope to choose how I ascend, and potentially limit my exposure in doing so.

I took this shot to show the tooth-marks the Exoskel's put into the hardwood packing crate I posed these pictures on. You can clearly see the three splintered spots where I moved up and down, and also the two divots in the corner where I dangled.

Very impressive, I must say.

Some of the excellent additional features they come with, such as the emergency stirrup replacement and calf-strap holes, which enable the user to use up to 12mm (½") rope / cord to tie the guards back on in the case of breakage. There are also guide-holes divoted into the perimeter of the guard to enable drilling and sewing of the guard directly to pants.


The channeled foam lining not only helped with the breathability issues often found with form-fitting guards, but the design, and thickness as well as the exterior shell itself added considerable impact protection. I'm no kick-boxer, nor did I take a sledge-hammer to my legs, but I kicked a few trees, and clubbed myself a few times to gauge the kinds of impacts I might expect to take and resist, and didn't come close to bothering myself. I'm pretty sure I'd have lost footing before the guard broke. You can even wear them over existing knee-guards, depending on the fits.

As a Close Quarter Battle tool, or restrain device, I can only imagine how unpleasant it would be to be on the receiving end of a kick with one of these, or to be knelt on, but I have little doubt as to their effectiveness as a compliance tool, if needed.

They were quick to fit and remove, whilst being comfortable and stable for day-to-day wear, and low profile enough that I didn't find myself snagging on anything. This is a really great innovation and I'll be adding them to my adventuring kit, for sure!







Tuesday, March 4, 2014

Review: Vibram Five Fingers

I've covered several sets of the very cool Paleo Barefoots and a variety of other footware, like my Magnum Amazon5's or the Danner Striker II boots before then. Footware is a very important aspect of both day to day life, and planning for those catastrophic events we are all hoping to be prepared for. When I had the opportunity to get a pair of the much vaunted Vibram Five Fingers toe shoes.

I've seen and heard about these for some time now, and thought I might give them a try, because they certainly have some interesting potential.



As well as having worn the Paleos, I have also spent a lot of time in tabi-boots over the years, so the idea of a split-toe shoe is not alien to me, but was an interesting to have a toe for each toe, rather than just one for the thumb as in tabi.

The Vibrams have an abrasion-resistant stretch polyamide fabric for the uppers, with a wrap over Hypalon strap, which feeds through a nylon ring, and secures with hook-and-loop.

The soles are Vibram's own TC-1 performance rubber, which is both a springy and tacky material. I found it quite grippy, even on sandy stone.

The footbed, inside the shoe is of an antimicrobial microfiber, which is great, especially as whilst socks are available, these tend to be a sockless kind of shoe. Having healthy feet is essential, especially if you have to be in your shoes for long periods of time. I'm always in favour of this kind if thing, which is why I also really like my BioDefence spray too .

So the best part of these are the segregated toes, allowing you to splay them independently, giving you very good constant contact with the ground, and the ability to grip with your toes, if you're that way inclined.

Conversly, the same thing can not be said for the main body of the shoe. I found it difficult to mold my feet to curves in the way I have grown accustomed to with my Barefoots, and even the flexible soles of the tabi, this might be due to not having worn them in as much as they need, but they just feel stiff.

They are a light alternative for running, for sure and perhaps it is my slightly wonky little toes which didn't quite sit nicely in these, but overall I didn't find them very comfortable. I will see if this improves with further wearing-in. Well made, and they certainly do everything they are known for, but I think I will stick to boots and Barefoots.

Thursday, February 6, 2014

Review: Magnum - Amazon 5 boots

I lucked out with a eBay lot and snagged some new summer-weight boots, just in time for the scorching weather we've been having. I wear boots all day, every day, apart from when I am in my Barefoots, or in fact barefoot. I've been wearing the rather comfortable Danner Striker II's but I wore them out, the sides wore through, in this case, rather than the way both my Bates Delta-8 and Altama Desert boots dies, with splits in the soles. FOr heavy work, I fall back to my HyTest armored boots.

These are the Magnum Amazon 5 boots "Light Sand" boots. A discontinued line, the current Magnum equivalent is their Mach II Desert boot.


These 8" boots are fitted out with a suede / 1150 Denier ballistic nylon upper, with a friction and slip resistant outsole, it is even stamped Oil and Slip resistant. The outsole has a steel shank, which adds to the support of the boot (though it did set off the metal detectors at the airport at my last visit).

The tread is quite interesting, in what appears to be a proprietary Magnum pattern, unlike the Panama or Vibram styles I have been used to. They have given me no trouble, and give quite an even walking and running surface. I also like that they include a Flex Groove to avoid the split that killed my Altamas and Bates boots.


The boots are lined with a Dri-Lex® two zone comfort lining with Hydrofil® for breathability, and the FPS footbed with dual shock pads and antibacterial lining. Months of wearing these boots now, and they don't smell too bad, thus far.

The padded, broadly gusseted tongue not only keeps the laces from pinching and rubbing the foreleg (important for those of us with skinny legs), but it also acts to keep out debris, which has done so nicely.

 I also really liked the built in boot-strap, which was offset from the mouth of the boot, meaning that I can feed my laces through them, without it riding up over my ankle.

As well as the boot-strap, they also feature 4 sets of eyelets, a set of speed hooks and then four sets of speed loops. This makes putting the boots on, and with a quick pull, the laces simply zip up tight and you are good to go.

I've given them a coat of spray on suede protector, which has kept some of the grot of my day to day life off them, but one thing I can say is that these are some comfortable boots. I look forwards to many seasons of wear out of them, but, we'll see. I seem to kill boots on a regular basis. I'd love to hear about what boots YOU get a lot of wear out of or can recommend ...



Related Posts Plugin for WordPress, Blogger...